User's Manual
Table Of Contents
- SAFETY INFORMATION
- Intended Use:
- Safety information for Trained Customer (e.g., officer, agency representative, ministry of justice) and Offender.
- Safety information for Trained Customer only.
- Safety information for Offender only.
- Default Notification Options
- Finish Enrollment
- Basic Rule Setup
- Finish Enrollment
- 1. Click on the Home Curfew Rule (see below).
- 2. Move your cursor over the Rule Functions menu and left click Edit.
- 3. You will be redirected to the Edit Rule page. Scroll down to the Permanent Rule Schedule.
- You can create an Exclusion Rule to ensure that the offender is not entering areas which are forbidden – such as schools, playgrounds, and victims’ residences.
- 1. Move your cursor over the Rule Functions menu (see below).
- 2. Left click Add Zone.
- 1. Move your cursor over the Hardware Functions menu and left click Unassign.
- 2. Click the checkbox next to the 1 Piece (Gen 4) and Beacon (see below).
- 3. Click on the drop-down menu and select an Unassignment Reason. This is required.
- 4. Click the Save button. A popup will generate with a warning that the unassignment is immediate.
- 5. Click OK.
- 6. You will be returned to the Offender Information page, where the Beacon will be unassigned and the 1 Piece (Gen 4) will be pending unassignment. The 1 Piece (Gen 4) is now required to call 3M Electronic Monitoring and transmit its final data. It wi...
![](/manual/attenti/ideu-830-2/user-s-manual-english/images/img-54.png)
54
Violations and Definitions, Cont.
1 Piece (Gen 4) Strap
• The strap has been compromised or removed from the 1 Piece (Gen 4).
There will not be any notification to the offender that this has occurred
unless the officer selects the Notify Offender with Vibrate option on this
rule.
1 Piece (Gen 4) Unable to Connect
• The 1 Piece (Gen 4) has a defined call-in interval that is determined by the
contract. If the 1 Piece (Gen 4) is unable to call 3M Electronic Monitoring at
its defined call-in interval, a default 90 minute grace period will go into
effect. If the default 90 minute grace period expires and the 1 Piece (Gen 4)
has still not called 3M Electronic Monitoring, the database will create this
alarm. This is normally due to poor cellular coverage in the area. The
offender is not notified of the Unable to Connect alarm. Once the 1 Piece
(Gen 4) is able to use the cellular network to call in, it will report any alarms
that occurred during this time and download all tracking data.
1 Piece (Gen 4) Tamper
• The 1 Piece (Gen 4) has been compromised in some form. There will not be
any notification to the offender that this has occurred unless the officer
selects the Notify Offender with Vibrate option on this rule.