User's Manual

Transmitting Tag Calibration and Installation
MEMS 3000 HomeStation & Transmitter Installation Guide
4-2
Now you can attach the transmitting tag to the offender’s wrist or ankle.
Attaching the Transmitting Tag
1. Place the strap holder over the short strap
of the transmitting tag.
2. Attach the female part of the strap clip to
the underside of the short strap ensuring
that the closed end of the clip fits snugly
onto the end of the strap
Note that for the ankle attachment the silver line on the underside of the
female strap clip should be visible
3. Wrap the transmitting tag around the wrist or ankle at its narrowest point
Note that for ankle attachments it is recommended to mount the
transmitting tag over a sock before the strap is closed. The protruding side of
the transmitting tag should be facing upwards
4. Lay the long strap over the female part of
the strap clip ensuring that the strap pins
and the clip studs are protruding through
the holes in the long strap