User's Manual

Removing the Monitoring System
MEMS 3000 HomeStation and Transmitter Installation Guide
7-2
Disconnecting and Packing the MEMS 3000
HomeStation
In order to disconnect and pack the MEMS 3000 HomeStation, perform the
following steps:
1. Remove the power adapter from the wall.
2. Remove all telephone cables from the back of the MEMS 3000
HomeStation.
3. Reconnect the telephone line to the wall socket.
4. Pack the MEMS 3000 HomeStation into its original package and place
into the carrying case.
5. Pack the power-cord adapter and telephone cables into their original
packaging and place into the carrying case. You can now remove and
pack the transmitting tag.
It is recommended that only experienced personnel remove the
transmitting tag.
Removing the Transmitting Tag
To remove the transmitting tag perform the following steps:
1. Check the following signs to see if the clips have been tampered with:
• Cracks on the clips
• Broken pins.
• Sign of adhesive or glue.