User's Manual

Removing the Monitoring System

MEMS 3000 HomeStation & Transmitter Installation Guide

7-3

Screwdrive

Grooves

2. Being careful not to damage or cut the strap, use a screwdriver to break

the disposable clips.

3. Collect all the fragments of the broken clip. Do not leave any disposable

items.

Deactivating the Transmitting Tag

Deactivating the transmitting tag is essential to preserving the unit’s internal

battery.

In order to deactivate (turn off) the transmitting tag, perform the following:

1. Hold the transmitter in your hand with the metal pins (along the strap)

pointing towards you. You will need to support the underside of the

strap.

2. Hold the electronic key in your other hand, with the ‘OFF’ button

pointing towards the open or free end of the strap. The ‘OFF’ button

must be facing away from the transmitter body.

3. Press the electronic key down over the metal pins with the two touch

points on top of the electronic key matching the metal pins on the

transmitter strap.

4. Hold the electronic key and the transmitter strap in this position while

you perform the next step.