User's Manual

Removing the Monitoring System
MEMS 3000 HomeStation and Transmitter Installation Guide
7-4
5. Press the ‘OFF’ on the electronic key for one second; the red LED light
on the electronic key turns steadily on for two seconds. If the transmitter
successfully received the deactivate command the red light on the
electronic key will flash for two seconds.
Note that if the transmitter failed to receive the deactivate command,
the red light on the electronic key will turn off after the initial two seconds
on. If the electronic key’s battery is low, the red light will immediately flash
for two seconds once the ‘ON’ button is pressed.
6. Pack the transmitting tag into its original packaging and place into the
carrying case.