User's Manual

E3 Receiver Unit and Transmitter Installation Guide
8
Deactivating the Transmitter
Deactivating the Transmitter is essential to preserving the unit’s
internal battery.
To deactivate (turn off) the Transmitter:
1. Hold the Transmitter in your hand with the metal pins (along
the strap) pointing towards you. You will need to support the
underside of the strap.
2. Hold the electronic key in your other hand, with the ‘OFF’
button pointing towards the open or free end of the strap.
The ‘OFF’ button must be facing away from the Transmitter
body.
3. Press the electronic key down over the metal pins with the
two touch points on top of the electronic key matching the
metal pins on the Transmitter strap.
4. Hold the electronic key and the Transmitter strap in this
position while you perform the next step.
5. Press the ‘OFF’ on the electronic key for one second; the red
LED light on the electronic key turns steadily on for two
seconds. If the Transmitter successfully received the
deactivate command the red light on the electronic key will
flash for two seconds.
Note: If the Transmitter failed to receive the deactivate
command, the red light on the electronic key will turn off
after the initial two seconds on. If the electronic key’s
battery is low, the red light will immediately flash for two
seconds once the ‘ON’ button is pressed.
6. Pack the Transmitter into its original packaging and place
into the carrying case.