User's Manual

E3 Receiver Unit and Transmitter Installation Guide
5. Using a dry cloth or towel, dry the outside of the Transmitter
and place it on a towel with its inner side facing up.
6. Using a soft brush, gently brush the inner side of the
Transmitter along the tracks.
7. After cleaning, wash the Transmitter in clean water.
8. Using a dry cloth or towel, dry the Transmitter thoroughly.
9. Place the strap holder back onto the short strap of the
Transmitter.
10. Place the Transmitter back into its carrying case.
To clean the Transmitter using a dishwasher:
1. Remove the Transmitter from its carrying case.
2. If there are clips on the Transmitter, remove the ‘female’
and ‘male’ parts before cleaning.
3. Remove the strap holder from the Transmitter.
4. Place the Transmitter into the dishwasher machine.
5. Use a pH neutral or slightly acidic cleaning agent.
Note: Elmo-Tech recommends Hepi dishwashing Products
by Thurn-produckte (http://www.thurn-produkte.de/).
6. Choose the shortest cycle, at a maximum temperature of
52ºC.
7. Once the Transmitter is dry, place the strap holder back
onto the short strap of the Transmitter.
8. Place the Transmitter back into its carrying case.
10