User's Manual

4 Maintenance
Replacing the Transmitter Straps
After some time and depending on the wear and tear of the
Transmitter, the straps on the Transmitter will need to be
replaced. Any of the following points could justify replacing a
Transmitter strap:
f Visible damage to one or both straps
f Strap tamper alarm generated, with no visible damage to
the Transmitter
f Transmitter will not calibrate
Note: If only one side of the strap is damaged, you may
want to leave the undamaged side in place and replace only
the damaged side of the strap.
Check that you have the following equipment items before you
replace the Transmitter straps:
f 1 Transmitter body
f 1 pair of replacement straps (long/medium non-pins side
and long/medium pins side)
f Screwdriver
f Extra screws
f Extra strap clips (male and female)
f Electronic key
11