Specifications

Using Help | Contents | Index
102
Shadow Tracker ™ Professional
Premier Base - Help
Using Help | Contents | Index
102
SHADOW TRACKER JR., J2, PRO AND PERFORMER
Disconnecting a Tracking Unit from a Vehicle
Unless you are using the ATTI Tracker Extractor or Palm® Extractor utility programs, the
Tracking Unit must be disconnected from your vehicle in order for the GPS data to be downloaded
for processing. Once a Tracking Unit’s memory is full, it is unable to continue collecting and
recording GPS data, until it has been downloaded and the memory has been cleared. The memory
is cleared automatically after each download.
To disconnect the tracking unit:
1 Disconnect the DC Power Adapter from the Unit. If you have a Pro Tracking Unit, also
disconnect the Ignition Cable.
2 Disconnect the GPS Antenna.
The Unit can now be connected to your computer and downloaded into your Shadow Tracker
Lite software. After the GPS data has been downloaded, reconnect the Tracking Unit to the
vehicle to continue collecting data.
Safety and Care
Please follow these guidelines to ensure the safe and trouble-free operation of your Tracking
Unit(s).
Safety
• Do not place the Unit near a heating device.
• Do not place the Unit in direct sunlight.
• Do not place anything heavy on the Unit.
• Do not place where spills can occur on the Unit.
• Do not subject the Unit to electrical shock.
• Do not apply any physical pressure to the Unit.
• Do not open or disassemble the Unit or any of its components.
• Do not scratch, twist or push the surface of the LED.
• Do not use the Unit when temperatures are below -40C / -40 F) or above 70C /158 F.
• Use only the GPS antenna provided by ATTI.
• Use only the AC or DC Power Adapter supplied with the Unit to avoid the risk of fire or
damage to the Unit.