Specifications

Using Help | Contents | Index
42
TRACKING UNIT MAINTENANCE
Shadow Tracker ™ Professional
Premier Base - Help
Using Help | Contents | Index
42
Shadow Tracker
To erase data from a unit:
1 Connect the Tracking Unit to the computer.
2 From the menu, select Shadow Tracker > Maintenance.
3 In the Tracker Maintenance window, click the Erase Shadow Tracker button.
4 You will receive a confirmation message; click Yes to erase the Unit.
When complete, you will be prompted with a message indicating whether or not the erase
utility was successful. If the Unit was erased, you can disconnect the Unit from your computer
and begin collecting GPS data. Otherwise, use the erase utility again.
Adjusting the GPS Collection Rate
The Shadow Tracker Premier does not have an adjustable GPS collection rate. But, if you have
Shadow Tracker Jr., j2, Pro or Performer Tracking Units validated to your System, the GPS collection
rate on these Units can be adjusted. The collection rate setting determines how often the Tracking
Unit will collect and record GPS coordinates. In other words, the time interval between recorded
GPS coordinates. The default collection rate setting is 10 seconds, but you can change this at any
time to one of the following settings:
• 3 seconds • 30 seconds
• 7 seconds • 45 seconds
• 10 seconds • 60 seconds
• 15 seconds • 90 seconds
• 20 seconds • 120 seconds
To change the GPS collection rate:
1 Connect the Tracking Unit to the computer.
2 From the menu, select Shadow Tracker > Maintenance.
3 Click the Get Shadow Tracker Information button.
4 Select a new collection rate from the drop-down list, and click the Set button.
5 Click the Close button.