Specifications

Using Help | Contents | Index

TRACKING UNIT MAINTENANCE

Shadow Tracker ™ Professional

Premier Base - Help

Using Help | Contents | Index

Administrator

4 Click the Remove Tracker button.

5 You will receive a confirmation message; click Yes to remove the Unit.

Erasing a Tracking Unit

After a Tracking Unit is downloaded, the Unit’s GPS data is automatically erased. There may be

times when you have collected GPS data that you do not wish to download and process into the

database. In order to clear the GPS data from the Unit, you will need to use the erase utility.

To erase data from a unit:

1 Connect the Tracking Unit to the computer.

2 From the menu, select Shadow Tracker > Maintenance.

3 In the Tracker Maintenance window, click the Erase Shadow Tracker button.

4 You will receive a confirmation message; click Yes to erase the Unit.

When complete, you will be prompted with a message indicating whether or not the erase

utility was successful. If the Unit was erased, you can disconnect the Unit from your computer

and begin collecting GPS data. Otherwise, use the erase utility again.

Adjusting the GPS Collection Rate

The Shadow Tracker Premier does not have an adjustable GPS collection rate. But, if you have

Shadow Tracker Jr., j2, Pro or Performer Tracking Units validated to your System, the GPS collection

rate on these Units can be adjusted. The collection rate setting determines how often the Tracking

Unit will collect and record GPS coordinates. In other words, the time interval between recorded

GPS coordinates. The default collection rate setting is 10 seconds, but you can change this at any

time to one of the following settings:

• 3 seconds • 30 seconds

• 7 seconds • 45 seconds

• 10 seconds • 60 seconds

• 15 seconds • 90 seconds

• 20 seconds • 120 seconds