Specifications

Using Help | Contents | Index

BASE RADIO CONFIGURATION

Shadow Tracker ™ Professional

Premier Base - Help

Using Help | Contents | Index

Administrator

BASE RADIO CONFIGURATION

The Base Radio Configuration Utility allows you to view and manage various connection and

operating settings for the Premier Base Radio. If the Quick Start Setup instructions were followed

correctly, it should not be necessary to adjust any of these settings. ATTI recommends not making

any changes to the Base Radio Configuration, unless instructed to do so by ATTI Technical Support

or these Help Files.

Base Radio Configuration Window

Packet Size – Sets the minimum packet size required by the Premier Base Radio to download a

Shadow Tracker Premier Tracking Unit.

OTE: This setting should be left at “70”, unless instructed to adjust by ATTI Technical

Support.

COM Port – Sets the COM Port on the computer that is used to connect to the Premier Base

Radio.

Number of Units – The number of Shadow Tracker Premier Tracking Units included in your

System.

Radio Group – The Radio Group number listed in your Premier Base System documentation.

Radio Address – The Base Radio Address number listed in your Premier Base System

documentation.

MPORTANT: Whenever a new Shadow Tracker Premier Tracking Unit is added to your System, the

Number of Units value must be incremented to reflect the total number of Premier Unit’s being

monitored by the Premier Base.

Premier Base COM Port

In order to establish communications you will need to set the COM Port # that the computer

will be using to connect to the Premier Base. In a Client/Server System the Premier Base will be

connected to the Server computer.

To set the Premier Base COM Port:

1 Connect and power the Premier Base to your computer. See Connecting the Premier Base.