Specifications

Using Help | Contents | Index
60
BASE RADIO CONFIGURATION
Shadow Tracker ™ Professional
Premier Base - Help
Using Help | Contents | Index
60
Administrator
2 From the Administrator program click Shadow Tracker > Maintenance > Base Unit
Configuration.
3 Select the COM Port # used to connect the Premier Base to the computer from the drop-
down list. All other settings can be left at the default values for now.
I
MPORTANT: Be sure to connect the RS-232 Serial connection cable to the same COM Port
connection you used to add the Tracking Units.
4 Click Set Base Configuration to save your changes.
5 Click Close and Exit to return to the Administrator program.
Premier Base Configuration Settings
To set or adjust base radio configuration settings:
1 In the Administrator window, select Shadow Tracker > Maintenance.
2 In the Tracker Maintenance window, click the Base Unit Configuration button.
3 Make the necessary setting adjustments.
IMPORTANT: When setting up the Premier Base Radio for the first time, after setting the COM
Port, the following entries must be made in order to establish communications between the Base
Radio and Tracking Units. Enter the following values listed on the Hardware Inventory Sheet
(included with your packing list):
• Radio Group
• Radio Address
• Number of Units (total number of Tracking Units in your System)
4 Click Set Base Configuration.
5 You will recieve a confirmation message, click OK.
6 To close the Tracker Maintenance window, click the Cancel button.