User Manual

ManualsBrandsAttic Breeze ManualsLighting & ElectricalGEN 3 AB-3543D-WHT Curb Mount Detached Solar Attic Fan 35W White

Installation Guide

AB–2042

AB–3042

AB–4042

AB–6042

ATTENTION: PLEASE READ THROUGH THIS ENTIRE INSTRUCTION GUIDE

BEFORE PROCEEDING WITH YOUR INSTALLATION. MAKE SURE YOU HAVE

THE REQUIRED TOOLS AND MATERIALS TO COMPLETE THE INSTALLATION OF

YOUR SOLAR ATTIC FAN BEFORE BEGINNING.

America's Leader in Solar Powered Ventilation

GEN II CMA/CMD Model Series Fans

Summary of content (4 pages)

PAGE 1
America's Leader in Solar Powered Ventilation Installation Guide AB–2042 AB–3042 AB–4042 AB–6042 GEN II CMA/CMD Model Series Fans ATTENTION: PLEASE READ THROUGH THIS ENTIRE INSTRUCTION GUIDE BEFORE PROCEEDING WITH YOUR INSTALLATION. MAKE SURE YOU HAVE THE REQUIRED TOOLS AND MATERIALS TO COMPLETE THE INSTALLATION OF YOUR SOLAR ATTIC FAN BEFORE BEGINNING.
PAGE 2
Getting Started Your Attic Breeze curb-mount solar attic fan is designed for easy installation with metal roofs, tile roofs, or roofs featuring other high-profile materials where a roof curb is required for proper installation. If installing our products on a composite shingled roof or a simliar low-profile roof type, please contact Attic Breeze for information on our self-flashing fans designed for those roof types.
PAGE 3
Installing the Fan Step 1 - Cut the Hole Begin by removing roof tiles in the area where the roof curb will be installed. Find the closest rafter to that location and determine if your roof has either 16" on center or 24" on center rafter spacing. If your roof has 24" on center rafter spacing, find the center point between two rafters and mark it as the center of the vent hole. For roofs with 16" on center spacing, mark the rafter itself as the center of the vent hole.
PAGE 4
Step 4 - Mount the Fan Remove all packaging material and tape from your fan. Position the fan so that it is centered with the vent hole and allow the control cable (and remote power cable connector if present) to hang freely from the bottom of the fan unit. Locate the control switch envelope included with your solar fan, or if installing a Breeze Mate® control system, please follow the instructions included with that product at this time.