User manual

- 13 -

Or login with read-only account which only allows reading the configuration and

cannot change setting.

Default password: 1234

2.3.2 Remote control – secure shell

SSH (secure shell) is required for controllers to remote login. The SSH client

software is available at the following web site:

SSHWinClient WWW: http://www.ssh.com/

Putty WWW: http://www.chiark.greenend.org.uk/

Host name: 192.168.1.100 (Please check your DHCP address for this field.)

Default password: 1234

2.4 Enclosure

2.4.1 LCM

There are four buttons to control LCM (LCD Control Module), including:

c (up), d (down), ESC (Escape), and ENT (Enter).

After booting up the system, the following screen shows management port IP and

model name:

192.168.1.100

i8500 ←

Press “ENT”, the LCM functions “System Info.”, “Alarm Mute”,

“Reset/Shutdown”, “Quick Install”, “Volume Wizard”, “View IP Setting”,

“Change IP Config” and “Reset to Default” will rotate by pressing c (up) and

d (down).

Tips

i8500 controllers only support SSH for remote control. For

using SSH, the IP address and password are required for login.