User manual

- 25 -
Using “System log server”, user can choose the facility and the event log level.
The default port of syslog is 514. The default setting enables event level: INFO,
WARNING and ERROR event logs.
There are some syslog server tools. The following web sites are for your
reference:
WinSyslog: http://www.winsyslog.com/
Kiwi Syslog Daemon: http://www.kiwisyslog.com/
Most UNIX systems build in syslog daemon.
“Event log filter” setting can enable event level on “Pop up events” and “LCM”.
3.5 iSCSI configuration
“iSCSI configuration” is designed for setting up the “Entity Property”, “NIC”,
“Node”, “Session”, and “CHAP account”.
Figure 3.5.1
3.5.1 Entity property
“Entity property” can view the entity name of the controller, and setup “iSNS
IP” for iSNS (Internet Storage Name Service). iSNS protocol allows automated
discovery, management and configuration of
iSCSI devices on a TCP/IP network.
Using iSNS, it needs to install a iSNS server in SAN. Add an iSNS server IP
address into iSNS server lists in order that iSCSI initiator service can send
queries. The entity name can’t be changed.
Figure 3.5.1.1