User manual

- 26 -
3.5.2 NIC
“NIC” can change IP addresses of iSCSI data ports.
Figure 3.5.2.1
(Figure 3.5.2.1: there are 2 iSCSI data ports.)
IP settings:
User can change IP address by moving mouse to the gray button of LAN port,
click “IP settings for iSCSI ports”. There are 2 selections, DHCP (Get IP
address from DHCP server) or static IP.
Figure 3.5.2.2
Default gateway:
Default gateway can be changed by moving mouse to the gray button of LAN
port, click “Become default gateway”. There is only one default gateway.
MTU / Jumbo frame:
MTU (Maximum Transmission Unit) size can be enabled by moving mouse to the
gray button of LAN port, click “Enable jumbo frame”.