User manual

- 31 -
Figure 3.6.1.2
Step 3: Decide VD size. User can enter a number less or equal to the default
number. Then click “ ”.
Figure 3.6.1.3
Step 4: Confirm page. Click “ ” if all setups are correct. Then
a VD will be created.
Done. You can start to use the system now.
Figure 3.6.1.4
(Figure 3.6.1.4: A RAID 0 Virtual disk with the VD name “QUICK13573”, named by system
itself, with the total available volume size 1862GB.)