User manual

- 46 -
Step 1: Create RG (RAID group).
To create the RAID group, please follow the procedures:
Figure 3.6.7.1
1. Select “/ Volume configuration / RAID group”.
2. Click “ “.
3. Input a RG Name, choose a RAID level from the list, click
“ “ to choose the RAID PD slot(s), then click
“ “.
4. Check the outcome. Click “ “ if all setups are
correct.
5. Done. A RG has been created.
Figure 3.6.7.2
(Figure 3.6.7.2: Creating a RAID 5 with 3 physical disks, named “RG-R5”. The total size is
931GB. Because there is no related VD, free size still remains 931GB.)
Step 2: Create VD (Virtual disk).
To create a data user volume, please follow the procedures.