User manual

- 70 -
iSCSI initiator iscsi-initiator-utils-4.0.3.0-4 in kernel 2.6.9
3. For Red Hat Enterprise Linux 5 (Kernel 2.6), use the build-in
iSCSI initiator iscsi-initiator-utils-6.2.0.742-0.5.el5 in kernel
2.6.18
Mac
ATTO Xtend SAN iSCSI initiator v3.10
System Requirements:
1. Mac OS X v10.5 or later
For ATTO Xtend SAN iSCSI initiator, it is not free. Please contact your
local distributor.
• iSCSI HBA card
Vendor Model
HP NC380T (PCI-Express, Gigabit, 2 ports, TCP/IP offload, iSCSI
offload)
QLogic QLA4010C (PCI-X, Gigabit, 1 port, TCP/IP offload, iSCSI offload)
QLogic QLA4052C (PCI-X, Gigabit, 2 ports, TCP/IP offload, iSCSI offload)
• NIC
Vendor Model
HP NC7170 (PCI-X, Gigabit, 2 ports)
HP NC360T (PCI-Express, Gigabit, 2 ports, TCP/IP offload)
IBM NetXtreme 1000 T (73P4201) (PCI-X, Gigabit, 2 ports, TCP/IP
offload)
Intel PWLA8492MT (PCI-X, Gigabit, 2 ports, TCP/IP offload)
• GbE Switch
Vendor Model
Dell PowerConnect 5324
Dell PowerConnect 2724
Dell PowerConnect 2708
HP ProCurve 1800-24G
• Hard drive
i8500 support SATA I, II disks.
Vendor Model
Hitachi Deskstar 7K250, HDS722580VLSA80, 80GB, 7200RPM, SATA, 8M
Hitachi Deskstar E7K500, HDS725050KLA360, 500GB, 7200RPM, SATA II,
16M