User manual

- 72 -
INFO
SCSI info Received SCSI Bus Reset event at the SCSI
Bus <number>.
• EMS events
Level Type Description
INFO
Power installed Power <number> is installed.
ERROR
Power absent Power <number> is absent.
INFO
Power work Power <number> is restored to work.
ERROR
Power warning Power <number> is out of work.
WARNING
Power detect PSU signal detection <number>.
INFO
Fan work Fan <number> is restored to work.
ERROR
Fan warning Fan <number> is out of work.
INFO
Fan installed Fan <number> is installed.
ERROR
Fan not present Fan <number> is not present.
WARNING
Thermal warning System temperature <location> is a little bit
higher.
ERROR
Thermal critical System Overheated <location>!!!
ERROR
Thermal critical
shutdown
System Overheated <location>!!! The system
will do the auto shutdown immediately.
WARNING
Thermal ignore
value
Unable to update thermal value on <location>.
WARNING
Voltage warning System voltage <location> is a little bit
higher/lower.
ERROR
Voltage critical System voltages <location> failed!!!
ERROR
Voltage critical
shutdown
System voltages <location> failed!!! The system
will do the auto shutdown immediately.
INFO
UPS info UPS detection succeeded.
WARNING
UPS error UPS detection failed.
ERROR
UPS error AC loss for the system is detected.
ERROR
UPS error UPS Power Low!!! The system will do the auto
shutdown immediately.
WARNING
SMART T.E.C. Disk <slot> S.M.A.R.T. Threshold Exceed
Condition occurred for attribute <item>.
WARNING
SMART failure Disk <slot>: Failure to get S.M.A.R.T
information.
• RMS events
Level Type Description
INFO
Console Login <username> login from <IP or serial console>
via Console UI.
INFO
Console Logout <username> logout from <IP or serial console>
via Console UI.
INFO
Web Login <username> login from <IP> via Web UI.
INFO
Web Logout <username> logout from <IP> via Web UI.
• LVM3 events
Level Type Description