User manual

- 77 -
D. Microsoft iSCSI Initiator
Here is the step by step to setup Microsoft iSCSI Initiator. Please visit Microsoft
website for latest iSCSI initiator. The following setup may not use the latest
Microsoft iSCSI initiator.
1. Run Microsoft iSCSI Initiator.
2. Click “Discovery”.
3. Click “Add”. Input IP address or DNS name of iSCSI storage device.
Figure D.2
4. Click “OK”.
5. Click “Targets”.
Figure D.3
6. Click “Log On”. Check “Enable multi-path” if running MPIO.