ATTO iPBridge Specification Sheet

I P S t o r a g e
Gigabit Ethernet and SCSI
GbE Interface:
Triple independent 100/1000 GbE RJ45
Ethernet ports
Supports IP v.4
Compliance with IEEE 802.3 GbE
Compliance with IEEE 802.3 Flow control
SNMP MIB 2.2 support
Supports Microsoft iSCSI Initiator
SCSI Interface:
Dual independent 160 MB/sec. Ultra3
LVD/SE SCSI bus ports
SCSI block level data encapsulation in
iSCSI transport
Controlled backup, recovery and data
transfer for network storage
Backward compatible with all single-ended
SCSI devices
Upgradeable large MB RAM Memory for
advanced data buffering and performance
Management
Operating Environment:
Operating system independent
Supports all SCSI devices including hard
disk drives, tape drives, RAID controllers,
DVD, MO & CD libraries
Local and Network Management:
Integrated web server for remote
configuration, management and
diagnostic capabilities
Local diagnostics supported through CLI,
SNMP, Telnet, FTP and SCSI Enclosure
Services (SES)
Command line and menu-based ASCII text
management access via Ethernet
Support for RS-232 access via RJ-11 interface
MultiTarget Mode allows each SCSI device
to have its own iSCSI Target name
Multiple levels of password protection
LEDs:
Ethernet link and activity
SCSI activity
Fault
Environmental and Physical Characteristics
Configurations:
Single (embedded) PCB
Desktop enclosure with rack mount kit
Dimensions:
Embedded Board:
6.193” W x 6.375” L
Rack/Desk Enclosure:
1.7” (1U) H x 17”W x 8.94” L
Operating Environment:
Operating: 5-40º Celsius
Temperature: user configurable
integrated thermal sensor data
for automatic shutdown
Default 70º Celsius
Air Flow: Recommended 11 CFM
Ambient Air not to exceed 40º Celsius
Humidity: 10-90% non-condensing
ATTO iPBridge™ 2500R/D
Power:
Embedded:
0.8A@ 12V, 0.3A@ 5V, 5.0A@ 3.3V
18 Watts
Weight:
8 lbs (Rack/Desk model)
©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev 11/05
Power Switch
Figure 1 - Rear Panel View
Serial Port
SCSI Port 1
Air Vent
GigE Port GigE Port GigE Port SCSI Port 2