Instruction manual

9
ATTO Technology Inc. FastStream SC 5700 Installation and Operation Manual
Custom initial setup
If the application setups do not suit your needs,
you may use Custom Setup to configure the
FastStream SC 5700.
1 Follow the directions in Initialize and verify
drives on page 7.
2On the Initial Setup page, choose the Custom
Setup button.
3 Click on Next.
4 Select a RAID level. Refer to Designing RAID
groups on page i in the Appendix for more
information.
5 Type a name for your RAID group in the box
provided on the page under the Step 2
heading.
6 Click Next.
7 Click on the System Scan button to discover
the drives available for RAID configuration.
8 When the scanned drives box is populated,
select the drives for the RAID group named in
Step 5
of this procedure.
9 Click Next.
10 Partition the RAID group as defined in Partition
RAID groups on page 11. If you do not want to
use partitions, click on the All Unallocated box.
11 Click Create.
12 Step 6 appears. Verify the setup, then click on
Commit to save your configuration.
13 A warning box appears. In the warning box,
verify that you want to complete the
configuration by clicking on Yes. Clicking on No
ends the procedure without making a change.
14 The FastStream configures the storage: the
process may take several hours. When the
process is complete, the Health and Status
Monitor page appears.