Instruction manual

16
2 In the left-hand menu, click on the Advanced
menu item.
3The Advanced CLI Configuration page
appears. Wait for the
Ready prompt, then type
in the CLI command in the text box provided.
Refer to CLI provides an ASCII-based interface
on page iii of the Appendix..
4 Click the Submit button: this is equivalent to
typing in the CLI command into a telnet or serial
port CLI session.
A text field beneath the box lists the most recent
commands issued to the FastStream through this
page. If you enter an incorrect parameter, the CLI
help text is displayed, showing the parameters
available. An asterisk next to the Ready prompt
indicates you must type
SaveConfiguration
restart
in the text box for changes to take effect.