Instruction manual

17
ATTO Technology Inc. FastStream SC 5700 Installation and Operation Manual
3.0 Monitor storage, configurations
You may determine the performance of drives attached to the FastStream SC 5700 using various
displays and tests in the ExpressNAV interface.
The following instructions assume you have
already set up RAID groups. Refer to Designing
RAID groups on page i of the Appendix and
Configure RAID on page 7.
The ATTO FastStream SC 5700 collects various
metrics to measure performance for physical
drives not in RAID groups during normal system
operation and drive initialization and verification.
CAUTIONCAUTION
New performance data is updated every 60
seconds which impacts performance
slightly, even if you minimize the browser
window. Close the ExpressNAV interface
completely whenever you need maximum
performance.
Health and Status Monitor page
When you open the ExpressNAV interface, the
Health and Status Monitor page appears. You
may also reach it at any time by clicking on
Monitor on the Menu Items list on the left hand
side of the ExpressNAV interface.
Clicking on
Details gives you added information
about each parameter by opening the
Configuration Display page.