Instruction manual

21
ATTO Technology Inc. FastStream SC 5700 Installation and Operation Manual
When the test is complete, click on each drive to
see its information highlighted in the Drive
Metrics window.
1 Follow the instructions in Preliminary steps on
page 20.
2 Click on Drive Performance and Health.
3 Click Next.
4The Drive Performance and Health page
appears. Click on a drive in the drive section.
5 Click Start.
6 Drive performance is displayed under the Drive
Metrics section of the Drive Performance and
Health page. Drive errors are displayed in the
Drive Errors section of the page.
Identify a drive attached to the FastStream
CAUTIONCAUTION
Executing this command will adversely
impact performance and throughput for the
time that the LED is illuminated.
1 Follow the instructions in Preliminary steps on
page 20.
2 Click on Identify Drive.
3The Identify Drive page appears. Click on any
drive. Only one drive may be selected at a time.
4 Click Commit. The I/O LED of the drive
illuminates for one minute.
5 To stop the operation, unselect the drive.
Note
To clean RAID configuration data, refer to
Update RAID configuration data on page
26.