Instruction manual

29
ATTO Technology Inc. FastStream SC 5700 Installation and Operation Manual
6.0 Interface options
The best way to manage, monitor and configure the FastStream SC 5700 is to use the ExpressNAV
interface, but you may use a terminal emulation program or Telnet.
Use the ExpressNAV interface
Use the ExpressNAV interface to manage,
monitor and configure the unit. The choices you
make lead you from screen to screen. Choices
which are not available are greyed out.
1 Working from the computer attached to the
FastStream SC 5700 Ethernet port, open your
browser and type in the FastStream SC 5700 IP
address as noted in
Discover the IP address on
page 5.
2 Your browser points to the ExpressNAV splash
screen. Press Enter.
3 Type in the user name and password values.
Note
The default values are user name: root and
password:
Password . The user name is case
insensitive and the password is case sensitive.
It is best practice to change the defaults: refer
to
Change current user name, password on
page 15.
The pages which next appear depend on whether
or not you have begun configuring the FastStream
SC 5700. Refer to Configure RAID on page 7.