User Manual

Setting Time
Connect the device to your computer to access the folder RECORD. Right-click in the
folder to select option “NEW” -> “Text Document”.
Name the new text file “time”. Open it with any text editor on your computer and input
your current time and date in the following format: YYYYMMDDHHMMSS , where
YYYY - is four digit year (ex. 2019), MM - is 2 digit month (ex. for May is 05), DD -
2 digit day (ex. if today is the 3rd - you must put 03). HH - means 2 digit hour in the
24 hours format (not a.m. or p.m.) - ex. for the time clock 5 P.M. you must use the digit
17, for 6 A.M. is 06, etc; mm - is 2 digit format for minutes and SS - is 2 digit format for
seconds.
seconds.
For example, if today would be the 22nd of May 2019, time 05:24 P.M. you should have
in the time.txt file the following string of digits: 20190522172400 (no spaces before or
after the string of digits).
NOTE: Make sure to save the file in the folder “RECORD” below the subfolder
“VOICE”. Then disconnect the recorder from your computer and perform a test
recording.