User Manual

ManualsBrandsATTOWAVE ManualsAutomotiveRADAR DETECTOR

enKo products

RADAR-LASER DETECTOR

Operating Instructions

MODEL : CCT278

Thank you for purchasing enKo products radar laser detector. The CCT278

model incorporates the advanced new radar antenna technology and extremely

low power-consuming circuitry to ensure top class performance. It is a complete

integrated laser and radar detector, which responds not only to X, K and Ka band

radar guns in use today, but also the laser guns.

The CCT278 provides distinct visual and audio alerts to warn you of the presence

of X, K, Ka band and laser signals for 360° round.

You can drive with confidence when you bring along the CCT278

PACKAGE CONTENTS

CCT278 package includes the following components.

 CCT278 radar and laser detector

 Coiled 12-volt DC power cord and fuse

 Windshield mounting bracket with suction cups

 Dashboard mounting hook and loop fasteners

 Operation manual

Summary of content (5 pages)

PAGE 1
Thank you for purchasing enKo products radar laser detector. The CCT278 model incorporates the advanced new radar antenna technology and extremely low power-consuming circuitry to ensure top class performance. It is a complete integrated laser and radar detector, which responds not only to X, K and Ka band radar guns in use today, but also the laser guns.
PAGE 2
Н С Х К Ка L 2 3 4 BASIC FEATURES AND CONTROLS 8 7 11 12 1 3 1 4 15 1 6 1 7 6 11. Highway Icon ‘H’ lights to indicate Highway mode is selected. 5 12. City Icon ‘C’ lights to indicate City mode is selected. 9 13. X Band Icon ‘X’ lights and blinks to indicate the presence of X band radar signal. The blink rate increases as the radar source gets closer. 4 10 3 1 2 14. K Band Icon ‘K’ lights and blinks to indicate the presence of K band radar signal.
PAGE 3
Mounting Type Connecting the Power There are two ways of installation The CCT278 detector is designed to op erate on most DC 12V neg ative ground vehicle ele ctrical sy stems. The power cord provided with the detector has a cigarette lighter socket plug at one end and a small connector at the other. Hook and Loop Mounting The hook and loop tape included with your detector might be the best mounting method for some dashboards.
PAGE 4
) Highway & City mode Selection 7) Receiving and Identifying Radar Press the CITY button to toggle between Highway and City modes. Distinctive audible alarms will be em itted for X, K and Ka band r adar signals. The alarm sounds will occur faster and faster as the signal gets stronger (as y ou get closer to the source). When the sig nal gets very strong, t he alarm sounds become continuous tones.
PAGE 5
Limited 1-Year Warranty enKo products warrants that its products, and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of its consumer purchase. SPECIFICATIONS RADAR Receiver Type: Antenna Type: Detector Type: Frequency of Operation: Dual Conversion Super-heterodyne Linear Polarized. Self-Contained Antenna Frequency Discriminator X Band 10.525 GHz ± 0.050 GHz K Band 24.150 GHz ± 0.100 GHz Ka Band 34.700GHz ± 1.