TT" Step 1: First unlock the 3 legs at the bottom sightly; then pull the top cap out about 2crr (Be careful and do nat get hurt by the clamp ll} Now pull the whole sick am out, znd the tripod wil open automatically. ATTENTION: 1, Please fully pull out the stick anm sa that the tripod can be fully opened, Otherwise, iPod is not fully opened and wil not be stable. 2.Please don't pul the legs to open tripod Micro USB 1 charging port 1 (Take out from the @Putin from the top Remote bottom. of the Remote.
Step: Put the iPod on flat surface, then adjust the extendable stick arm for suitable height. If you do not need to use as tripod, Just pull out the stick arm out and adjust height to use ir. Step: Width wise set your phone inside the smartphone holder by releasing the top cap. Note: please avoid stuck the button of your phone. Remove your mobile phone by releasing the top cap. Then, hold the product middle position and use the other hand to push the aluminum alloy telescopic arm back from the top cap.
Bluetooth Connect Instruction No| status LED Light Indicator Switch On Green Light Flashing 1 Long press camera bunion for 2 seconds, 10 open rem. Switch OFf I LED Light OFF 2 |” Long pres camera bunion for 3 second, emote Ig OFF. Standby I LED Light OFF Remote will standby fare 10 minutes without operation; 3 Press the button for ore to active, then green light will fish, please reconnect with phone again.
MATURATE Contact us via Facebook Messenger (Recommended): oR www.atumtek.com OR If you find aur product satisfactory, please encourage us by sharing your user experience online. If you need help with this purchase, please do not hesitate to contact us. Synergy UK Led C/O Lapland Co.