Manual

Before installing and using this product, please read the instructions fully and carefully,

And be sure to keep it handy for late use.

50304375A

DIMENSIONS

HCM160

POLE MOUNT & CORNER BRACKET

Ø121.00

Ø106.50

160.00

85.56

92.00

66.00

85.56

130.50

110.00

120.00

70.00

90.00

20.00

15.00

5.00

20.00

160.00

70.00

25.00

4-57.00

30.00

57.20

Pole

20.00

PAGE 1
HCM160 POLE MOUNT & CORNER BRACKET 20 .0 0 130.50 16 0. 00 90 70 .00 .0 0 0 0 .0 0 .0 5 0.0 15 2 20 .0 0 DIMENSIONS 4-57.00 Pole 0 .0 25 0 .0 30 90 0 .2 57 92.00 120.00 70.00 110.00 85.56 1.00 Ø10 Ø12 6.50 66.00 160.00 20.00 85.56 160.00 50304375A Before installing and using this product, please read the instructions fully and carefully, And be sure to keep it handy for late use.
PAGE 2
Prior to Use Using the pole & Mount as a template, mark the locations of the six screw holes where the mounting adaptor will go. Install the plastic anchors(D6) at the six pre-marked locations. Use the screws with washers to affix the mount adaptor to the corner of a building structure. Avoid installing the mount onto an unstable structure such as a gypsum wall panel. Install the mount onto a strong structure such as a concrete wall, steel beam, etc.