User Manual

4.5.3 Motion
To set and schedule motions across channels
Motion > Setup
To set motions across channels.
Figure 4-50 Event > Motion > Setup
Table 4-52 Event > Motion > Setup Item and Description
No.
Name
Function
1
CH
Display channels.
2
Use
Select/deselect whether to use motion function in the channel.
3
Area
Display the motion area.
4
Sens.
Select the sense level of the motion sensor (Level 1~10).
5
Beep
Select use time of buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10
min, 30 min, and 1 hour).
6
Alarm
Set alarm output.
7
Group Rec.
Select the camera to record simultaneously.
8
Noti.
Set email notices.
9
Preset
Set preset of PTZ camera.
10
Copy to Motion
Setup
Copy motion set value to other channels. For more information about set
value copy, see section “4.4.2 Stream > Main Stream in Main Stream.”
Note
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing
icon( ) in right corner displays Event : Alarm screen. For more information about
Event : Motion screen, see section “4.5.2 Alarm In > Setup in Alarm In.”