User Manual

Display > Spot

Set the output of the Spot monitor.

Figure 4-26 DEVICE > Display > Spot

Table 4-27 DEVICE > Display > Spot Item and Description

No.

Name

Function

Sequence

Set the channel and dwell time (5, 10, 20, 30sec) when the Auto mode of

Spot Monitor is selected.

Event Popup

Sets the hold time of the full screen image of the channel where the event

occurred (Off, 5, 10, 20, 30sec, Continuous).

If multiple channels have an event at the same time, the event channel is

shown as a spilt screen.

Note



4Ch DVR does not support this function.