User Manual

•

Exposure Control

–

Mode: Determines exposure mode among automatic and flicker-free modes.

Users can use Automatic mode with full shutter speed or Flicker-free mode with a limited

range of shutter due to an anti-flicker function.

–

Max. gain: Sets maximum gain threshold.

–

Shutter: Sets shutter speed of the sensor. If users set Automatic, Max shutter and Min

shutter can be selected.

If the object is as fast as a car, please change the Max shutter to a faster value (eg 1/10 ->

1/120). If users set Manual, fixed shutter speed can be selected.

Note: If the shutter speed is set Manual, the screen may be saturated or dark.

–

Max. shutter: Users can set the limit for slow shutter speeds used in dark environments.

–

Min. shutter: Users can set the limit for fast shutter speeds used in bright environments.

–

Enable P-IRIS: Check this box to activate the P-IRIS function

If users set Automatic, users can specify the range of P-IRIS to be used, and P-IRIS is

automatically adjusted according to the amount of light around the camera.

If users set Manual, P-IRIS is fixed.

(Only, P-IRIS is changed to maximum open due to the securing of light intensity at night

shift.)

•

Image Appearance

This provides access to the advanced image settings for the network camera.

–

Brightness: The image brightness can be adjusted in the range 1-10, where a

higher

value produces a brighter image.

–

Contrast: Adjust the image’s contrast by raising or lowering the value in this field.