User Manual

Event Out

∇

SMTP(E-Mail)

The network camera can be configured to send event and error email messages via SMTP

(Simple

Mail Transfer Protocol).

•

SMTP (E-Mail) Setting: Select “Enable” to activate the SMTP operation.

–

Sender: Enter an email address to be used as the sender for all messages sent

by the

network camera.

–

Interval: Represents the time interval of the email notification when events occur

several times.

–

Aggregate events: Shows the maximum number of emails sent within each interval.

–

Use Mail Server: Check the box if you are using a mail server to receive event

notification and image email.

Mail Server: Enter the host names (or IP addresses) for your mail server.

Port: Enter the port number for your mail server.

Connection security: Select a connection security type in the drop-down

list: None, Startle, SSL.

–

Enable use(SMTP) authentication: Check the box if your mail server requires

authentication.

User name/Password: Enter the User name and Password as provided by

your

network administrator or ISP (Internet Service Provider).

/ AUTH PLAIN

•

SMTP (E-Mail) Receiver: User can assign up to 8 receivers

–

Receiver #: Enter an email address.