User Manual

∇ Record

When the network camera detects an event, it can record the video stream onto the Micro

Memory (not supplied) or NAS (Network Attached Device) as a storage device. Check

the “Enable

Record” box to enable the service.

•

Record Setting

–

Overwrite: Click checkbox to overwrite the storage device; Continuous Record is

available when not using an SD card.

–

Stream Type: You can select Stream 1, Stream 3, or Stream 4.

Stream1, 3, 4: H.264 data

Note: Stream2: MJPEG data cannot be recorded.

–

Pre-event: Enter pre-event time value for the storage device pre-recording.

–

Post-event: Enter post-event time value for the storage device pre-recording.

–

Audio Record: Check the box if you want to record audio with video.

•

Record Schedule

You can set the weekly recording schedule for each day. Drag or click area by a box

unit at first. Clicking the block toggles the recording between on and off. Click the All

Select

button to set a schedule for the entire week or a whole day, respectively.

•

Device Setting

Select the device type to be recorded in the drop-down list. The screen changes