User Manual

∇

RTP

Create a setting for sending and receiving an audio or video on a real-time basis. These

settings

are the IP address, port number, and Time-To-Live value (TTL) to use for the media

stream(s) in

multicast H.264 format. Only certain IP addresses and port numbers should be

used for multicast

streams.

•

Port Range

–

Start/End port: Enter a value between 1024 and 65532

•

Multicast (Stream1/Stream2/Stream3/Audio/Meta)

This function is for sending Video and Meta Data to Multicast group.

–

Enable Multicast: Check the box to enable multicast operation.

–

Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.

–

RTP port: Enter a value between 1024 and 65532.

–

RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter

lower value. However, if a network status is poor, enter a higher value. When

there are