User Manual

70
many network cameras or users, a higher value may cause a heavy load to the network.
Consult with a network manager for detailed information.
– Always enable multicast: Check the box to start multicast streaming without
opening an RTSP session.
When the settings are complete, click Save button to save the settings, or click Reset button to clear
all of the information you entered without saving it.
∇ UPnP
The network camera includes support for UPnP. UPnP is enabled by default, so the network camera
is automatically detected by operating systems and clients that support this protocol. Enter a name in
the Friendly name field.
NOTE: UPnP must be installed on your workstation if running Windows XP. To do this, open
the Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove
Windows Components and open the Networking Services section. Click De- tails and then select
UPnP as the service to add.
When the settings are complete, click Save button to save the settings, or click Reset button to clear
all of the information you entered without saving it.