Quick Guide 4/8/16/32 Ch NVR (Network Video Recorder) Please read this manual thoroughly before use and keep it handy for future reference.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE.
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
1. Overview 1.1 Package Contents The device package contents consist of the following: Note Please check all components involved. Table 1-1 Package contents No. Name No. Name 1 NVR 2 DC Adapter(4/8ch only) 3 Power cord 4 Mouse 5 SATA cable 6 SATA power cable 7 HDD fixing screw 8 Rack mount bracket & screws 9 Program CD 10 Quick guide(This document) 1.
4CH NVR(2HDDs) 8CH NVR(2HDDS) 16CH NVR(2HDDs) 16/32CH NVR(4HDDs) Figure 1-2 Name and Connection of rear section of 4ch, 8ch and 16ch NVR Quick Guide Error! Use the Home tab to apply 제목 1 to the text that you want to appear here.
Table 1-3 Name and Function of rear section of 4ch, 8ch and 16ch NVR No. Name 1 IP CAM / PoE 2 Network Network connector. 3 Audio In Audio input port. 4 Audio Out 5 VGA 6 HDMI 7 USB 3.0 8 Alarm In/Out 9 RS485 10 Power Switch 11 DC48V 12 AC POWER INPUT 13 e-SATA Quick Guide Function IP camera input port, IEEE802.3at PoE support. Audio output port. VGA output port. HDMI output port. USB 3.0 port is connected for data back-up. Alarm connector. RS-485 communication connector.
2. Installation This chapter describes the way to install NVR. When installing a device, connect rear of the device with each port on the basis of below connection map. Figure 2-1 Connection map The device starts first like below sequences: 1 Installing HDD 2 Connecting with an exterior device 3 Starting a system 4 Setting a quick setup 2.
2.2 Starting System Power supply begins with system operation as follows: 1 Switching on initialize with below icons in order. Note Installing new HDD might take more initialize time. 2 With buzzer sounds, the start screen is presented. 3 In Log in screen, enter the ID, Password and press OK. Default ID & Password is admin/admin. Click Note to see the MAC address. If lost password, inform the MAC address to supplier to create temporary password.
Note Default ID/Password is admin/admin. The default password must be changed for security. Max character length is 12. A password can be used if it satisfies two or more in the following criteria: 1) It contains at least one lowercase English character. 2) It contains at least one uppercase English character. 3) It contains at least one special character. The special characters are “! @ # $ % ^ & * ( ) - + ...” 4) It contains at least one digit.
2.3.3 Network How to set the network of Easy Installation: 1 Set each item in Network setting screen. 2.3.4 WAN Port: Select whether to use static IP or dynamic IP. IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter information in each space. Time/Date 1 Set each item in Time/Date setting screen. Quick Guide Network Time Sync: Select network for synchronizing with time server.
3. Live Screen Configuration UI screen is configured like below figure. Quick Guide No. Item Description 1 Setup menu Setting menu is located in the corner of upper screen. 2 Live screen Show live video of connected cameras. 3 Launcher menu 4 Quick menu 5 Add to CH Launcher menu is located in the corner of below screen. Clicking the right button of a mouse displays Quick menu. Move mouse cursor on the center of window to register IP camera manually. See”3.3.
3.1 Icons in Live screen Each icon in the live screen displays a present setting status or a function. UI screen consists of like below. No. Icon 1 CH1 CAM1 2 Description Channel numbers and camera titles. A camera with PTZ function. PTZ control function in process. Recording in alarm event mode. Recording in motion event mode. Recording in panic recording mode. Recording in consecutive recording mode. 3 Video loss icon. 4 Mic on/off. Speaker on/off. Displaying present time and date.
3.2 Live Launcher menu This chapter describes Launcher menu in the bottom of the screen. No. Item 1 Quick Guide Description Log in/out status and logged in ID. 2 Date & Time 3 HDD Displaying present date and time. Displaying HDD capacity in use. 4 Moving to previous/next partition screen. 5 Displaying live screen in order set (toggle). 6 Selecting partition mode to mark in live screen (single screen, 4-, 9-, and 16partition). 7 Stopping or replaying selected live screen images (toggle).
3.3 Quick menu This chapter depicts Quick menu when users click the right button of the mouse in live screen. Quick Guide No. Item Description 1 Screen Mode Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4). 2 Fisheye Filter Selecting Fisheye filter. This menu is shown when fisheye camera connected. 3 Zoom in 4 Freeze 5 Speaker Output/Mute Turning on/off a sound speaker. 6 PTZ Control Controlling PTZ function. This menu is shown when PTZ camera connected.
No. Item 16 Log in/Log out 17 Shutdown 3.3.1 Description Log in/Log out. Shuts down or restarts the device (shutdown, restart). Camera Registration Users can register the IP cameras No. Item 1 Quick Guide Description Search the connected IP cameras. 2 Auto Assign Automatically assign the channel windows. 3 Port 4 Assign Selecting the channel windows manually. 5 Model Show detected camera model number. 6 IP 7 Status Show connection status.
4. Setup menu This chapter describes Setup menu in the upper side of the screen. Selecting the menu opens the setting screen. Note No. Item 1 SYSTEM Setting the system environment. 2 CAMERA Setting the camera. 3 DEVICE Setting the non-camera devices connected to the NVR. 4 RECORD Setting the recording parameters. 5 EVENT 6 NETWORK Note Quick Guide Setup screen is available to click Setup in Quick menu by clicking the right button of the mouse. Description Setting each event.
