User Manual

ManualsBrandsATV ManualsRecording8 Channel 4K H.265 Network Video Recorder, 6TB

User Manual

4/8/16/32Ch NVR (Network Video Recorder)

Please read this manual thoroughly before use and keep it handy for future reference.

Summary of content (118 pages)

PAGE 1
User Manual 4/8/16/32Ch NVR (Network Video Recorder) Please read this manual thoroughly before use and keep it handy for future reference.
PAGE 2
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE.
PAGE 3
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
PAGE 5
Table of Contents Table of Contents ................................................................................................................................. 1 1. 2. Overview 1.1 Package Contents ...................................................................................................................... 4 1.2 NVR Description ......................................................................................................................... 4 Installation Installing HDD .......
PAGE 6
4.3 4.4 CAMERA .................................................................................................................................. 42 4.3.1 Basic .......................................................................................................................... 42 4.3.2 Advanced ................................................................................................................... 45 4.3.3 Registration .................................................................
PAGE 7
1. Overview This chapter describes NVR overview, components and their terms and features. This manual introduces a network video recorder (NVR) which monitors or record, controls images via a network camera. Multiple users may monitor video at the same time, and many cameras can be controlled simultaneously by a manager. Also, through a PC or a smartphone, video might be monitored by transmitting video and audio using a network.
PAGE 8
1.1 Package Contents The device package contents consist of the following: Note Please check all components involved. Table 1-1 Package contents No. 1.2 Name No.
PAGE 9
4CH NVR(2HDDs) 8CH NVR(2HDDS) 16CH NVR(2HDDs) 16/32CH NVR(4HDDs) Figure 1-2 Name and Connection of rear section of 4ch, 8ch and 16ch NVR
PAGE 10
Table 1-3 Name and Function of rear section of 4ch, 8ch and 16ch NVR No. Name Function 1 IP CAM / PoE 2 Network Network connector. 3 Audio In Audio input port. 4 Audio Out 5 VGA 6 HDMI 7 USB 3.0 8 Alarm In/Out 9 RS485 10 Power Switch 11 DC48V 12 AC POWER INPUT 13 e-SATA IP camera input port, IEEE802.3at PoE support. Audio output port. VGA output port. HDMI output port. USB 3.0 port is connected for data back-up. Alarm connector. RS-485 communication connector. Power On-Off.
PAGE 11
2. Installation This chapter describes the way to install NVR. When installing a device, connect rear of the device with each port on the basis of below connection map.
PAGE 12
2.1 Installing HDD How to install HDD in the device:  Withdraw the main plug before installing HDD to reduce the risk of injury or Attention electrical shock, or device malfunction.  Make sure to check the compatibility of HDD with the device. 1 Always switch off and unplug the unit. 2 Unscrew with a screw driver (+) and open the unit cover. 3 Unscrew HDD set screws of the bracket to disassemble. 4 Install HDD in the bottom case. 5 Fix the HDD-installed bracket with the unit.
PAGE 13
6 Connect a monitor with VGA or HDDMI port. 7 Connect a network port. 8 Connect an alarm and RS485 device. 9 Connect an e-SATA storage(4HDD model only). 10 Connect USB port for data back-up. 11 Supply the main power after completion.
PAGE 14
2.3 Starting System Power supply begins with system operation as follows: 1 Switching on initialize with below icons in order. Note Installing new HDD might take more initialize time. 2 With buzzer sounds, the start screen is presented. 3 In Log in screen, enter the ID, Password and press OK. Default ID & Password is admin/admin. Note Click to see the MAC address. If lost password, inform the MAC address to supplier to create temporary password.
PAGE 15
2.4 Quick Setup First start of the system operates Easy Installation as follows: 1 Account 2 System 3 Network 4 Time/Date 5 Easy Installation Wizard 2.4.1 Account How to set Account of Easy Installation: 1 Click the keyboard icon to set ID and Password users want. 2 With keyboard UI, set the ID and Password, and press OK. Note  Default ID/Password is admin/admin.  The default password must be changed for security.  Max character length is 12. 3 Enter new password.
PAGE 16
2.4.2 System How to set the system of Easy Installation: 1 Set each item in System setting screen.  Language: Select system language.  Device Name: Enter the device name.  Keyboard ID: To identify device usages in controlling NVR with RS485 through a keyboard  Selecting the device ID. In case of simultaneous use of equipment, set ID with difference. Note   As for using many NVRs, set ID with difference. HDMI/VGA: Set resolution of a monitor connected to the device.
PAGE 17
2.4.3 Network How to set the network of Easy Installation: 1 Set each item in Network setting screen.  WAN Port: Select whether to use static IP or dynamic IP.  IP Address, Subnet Mask, Gateway, DNS, and Port: As for dynamic IP, enter information in each space. 2 Press Save button to save set value. 3 Press Next to end Network setting and move the next setting phase. 2.4.4 Time/Date How to set the time/date of Easy Installation: 1 Set each item in Time/Date setting screen.
PAGE 18
2.4.5 Easy Installation Wizard 1 Select to run Easy Installation every time when the system start. 2 Press Save button to save set value and end Easy Installation.
PAGE 19
3. Live Screen Configuration UI screen is configured like below figure. Figure 3-1 UI Screen Configuration Table 3-1 Items and Description of UI Screen Configuration No. Item Description 1 Setup menu Setting menu is located in the corner of upper screen. See “4 Setup menu” to display detailed information about the setting menu. 2 Live screen Show live video of connected cameras. 3 Launcher menu 4 Quick menu Clicking the right button of a mouse displays Quick menu. See “3.
PAGE 20
3.1 Icons in Live screen Each icon in the live screen displays a present setting status or a function. UI screen consists of like below. Figure 3-2 Live screen icon Table 3-2 Live screen icon and its description No. Icon 1 CH1 CAM1 Description Channel numbers and camera titles. 2 A camera with PTZ function. 3 PTZ control function in process. 4 Recording in alarm event mode. 5 Recording in motion event mode. 6 Recording in panic recording mode. 7 Recording in consecutive recording mode.
PAGE 21
Note Chosen live screen is marked as a blue frame; mouse-located live screen is marked as yellow one.
PAGE 22
3.2 Live Launcher menu This chapter describes Launcher menu in the bottom of the screen. Figure 3-4 Launcher menu Table 3-3 Launcher menu Item and Description No. Item 1 Description Log in/out status and logged in ID. 2 Date & Time 3 HDD Displaying present date and time. Displaying HDD capacity in use. 4 Moving to previous/next partition screen. 5 Displaying live screen in order set (toggle). 6 Selecting partition mode to mark in live screen (single screen, 4-, 9-, and 16partition).
PAGE 23
3.2.1 Backup The device provides a back-up function of live screen. Figure 3-5 Backup Table 3-4 Backup Item and Description No. Item Description 1 Select CH 2 Select All/ Unselect All 3 Start Setting back-up start time (Bookmark: bookmark list). 4 End Setting back-up ending time (Bookmark: bookmark list). 5 Time Overlap Selecting time if there are two recorded data in the same time. 6 Backup Mask User can mask selected area. It works H4V format only.
PAGE 24
No. Item 16 Cancel Description Closing the backup screen. Select Backup Mask and click SET button to open the Privacy Mask pop-up window. Figure 3-6 Backup Mask Table 3-5 Backup Mask Item and Description No. Item Description 1 Select CH 2 Privacy Mask Enable 3 Mask Zone Apply all or only the selected mask. 4 New Mask Create a new privacy zone. Up to 4 masks can be created. 5 Delete Mask Select the channel to set the privacy zone. Select whether to use the Privacy Mask.
PAGE 25
3.3 Quick menu This chapter depicts Quick menu when users click the right button of the mouse in live screen. Figure 3-7 Quick menu Table 3-6 Quick menu Item and Description No. Item 1 Screen Mode Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4). 2 Fisheye View Mode Selecting Fisheye view mode. This menu is shown when fisheye camera connected. 3 Zoom in 4 Freeze 5 Speaker Output/Mute Turning on/off a sound speaker. 6 PTZ Control Controlling PTZ function.
PAGE 26
No. Item 13 Warp 14 Camera Registration 15 Status 16 Log in/Log out 17 Shutdown Description Monitor and control for remote recorder. Opens a pop-up menu for IP camera registration. Opens a pop-up menu showing: device system log, event, and recording status (system log, event, and record). Log in/Log out. Shuts down or restarts the device (shutdown, restart). Select Fisheye view mode to dewarp fisheye camera.
PAGE 27
3.3.1 PTZ Control Users click the right button of the mouse in live screen and select PTZ control menu to control PTZ. Note When the PTZ camera is registered, the icon is displayed at the top of the screen. The PTZ control selection menu appears only in full screan mode. Figure 3-8 Quick menu > PTZ Control Table 3-7 Quick menu > PTZ Control Item and Description No. Item 1 Control pan & tilt with direction buttons. Control pan & tilt with drag the PTZ ball.
PAGE 28
Table 3-8 PTZ Control Item and Description in Quick menu No. Item 1 Preset Go 2 Preset Save 3 Tour Go 4 Tour Save 5 Scan Go 6 Pattern Go 7 Exit Description Run selected Preset number. Save specific positions of the camera, at most 255 settings. Run Tour function. Save multiple preset positions to run each position in order. Run Scan function. Run Pattern function. Exit to live screen menu in PTZ Control menu. 3.3.2 Camera Registration Users can register the IP cameras.
PAGE 29
No. Item Description 7 Status Show connection status. 8 Priority Select IP Address or Zero conf IP. When camera have IP address and zero conf IP, NVR display selected priority address. 9 Add Manually Select channel and click to open manual add window. Add Manually Click to open Camera Registration. Or move mouse point at the middle of channel window on the live screen and click . Figure 3-11 Camera Registration (manual add) Table 3-10 Camera Registration (manual add) No.
PAGE 30
Figure 3-12 Status > System log in Quick menu Table 3-11 Status of Quick menu > System log Item and Description No. Item Description 1 Start Setting starting time of system log to search. 2 End Setting ending time of system log to search. 3 Log Type 4 Select All /Unselect All 5 Selecting log types (Network, Record, Setup, Disk, Backup, and System) Selecting or clearing all log types (toggle). Pressing search button search on the basis of set condition.
PAGE 31
3.3.4 Status > Event Users can see the real-time event information of the unit in Event tap in Status screen. Figure 3-13 Status > Event in Quick menu Table 3-12 No. Status > Event Item and Description in Quick menu Item 1 Description Temporary fixing or releasing an event list (toggle). 2 Refresh 3 Event list 4 Cancel Deleting the event list. Displaying the event list. Completing the status screen.
PAGE 32
3.3.5 Status > Record Users can see the recording status in Record tap in Status screen. Figure 3-14 Status > Record in Quick menu Table 3-13 No. Item 1 Record time 2 Record list 3 Cancel Status > Record Item and Description in Quick menu Description Marking recorded period. Displaying the record setting status. Completing the status screen.
PAGE 33
3.3.6 Status > Disk Users can see the disk status in Disk tap in Status screen. Figure 3-15 Status > Disk in Quick menu Table 3-14 Status > Disk Item and Description in Quick menu No. Item Description 1 Disk Info Display disk temperature and S.M.A.R.T information. 2 Rec. Info Display recording period. 3 Cancel Completing the status screen.
PAGE 34
4. Setup menu This chapter describes Setup menu in the upper side of the screen. Figure 4-1 Setup menu Selecting the menu opens the setting screen. Note Setup screen is available to click Setup in Quick menu by clicking the right button of the mouse. Table 4-1 Setup menu Item and Description No. Item Description 1 SYSTEM Setting the system environment. 2 CAMERA Setting the camera. 3 DEVICE Setting the non-camera devices connected to the NVR. 4 RECORD Setting the recording parameters.
PAGE 35
1 Depth 2 Depth 3 Depth Setup Disk iSCSI PTZ PTZ Serial Device Serial Device Text Text Schedule Schedule Main Stream RECORD Stream Sub Stream Panic System System/Disk Disk Setup Alarm In Schedule EVENT Setup Motion Schedule Video Loss Setup Periodic Notification Schedule WAN Port Basic PoE Port IP Filter DVRNS/Dashboard DVRNS/DDNS DDNS NETWORK E-Mail E-Mail FTP FTP Warp Registration P2P P2P Notification Server Notification Server Notification Message
PAGE 36
4.1 General buttons in Setup menu This section depicts General buttons in Setup menu. Figure 4-2 General buttons in Setup menu Table 4-3 Item and Description of General buttons in Setup menu No. Item Description 1 Default 2 Save 3 Cancel Close window. 4 Restore Cancel the set value, and reverse it to previous value. 5 Apply Reverse changed setting value to default in factory. Save the set content. Apply the content set.
PAGE 37
4.2 SYSTEM In SYSTEM, basic system environment is set. 4.2.1 System Set and upgrade the basic items of the system. System > System Set the basic items in the System. Figure 4-3 SYSTEM > System > System Table 4-4 SYSTEM > System > System Item and Description No. Name 1 Language 2 Device Name 3 Video Type 4 Keyboard ID 5 Easy Installation 6 Run Warning Function Set the system language. Enter the device name (Only English is possible). Select image standard types (NTSC, PAL).
PAGE 38
System > F/W Upgrade Set the upgraded items of the system. Figure 4-4 SYSTEM > System > F/W Upgrade Table 4-5 SYSTEM > System > F/W Upgrade Item and Description No. Name Function 1 Current Version 2 Device Displaying the present firmware version. Connect USB memory that has files to upgrade to the USB port, select files to upgrade. Displaying new firmware list on the cloud server. 3 Could Click Check button to check for new version. Click Upgrade to upgrade to selected firmware.
PAGE 39
4.2.2 Time/Date Set the date, time, and holidays of the system. Time/Date > Time/Date Set the date, time, and holidays of the system. Figure 4-5 SYSTEM > Time/Date > Time/Date Table 4-6 SYSTEM > Time/Date > Time/Date Item and Description No. Name Function Set the date and time. 1 System Time  DST: Select whether to use summer time.  Time change: Save changed time. If time changed to older time, time overlap list will be created and user can select the list from search and backup menu.
PAGE 40
Time/Date > Holiday Set holidays of the system. Figure 4-6 SYSTEM > Time/Date > Holiday Table 4-7 SYSTEM > Time/Date > Holiday Item and Description No. Name 1 Year 2 Function Select years to set holidays. Delete selected holidays. 3 Add Holiday 4 List Add holidays. Display added holiday lists.
PAGE 41
Clicking Add Holiday displays holiday addition screen like below. Figure 4-7 SYSTEM > Time/Date > Holiday > Add Holiday Table 4-8 SYSTEM > Time/Date > Holiday > Add Holiday Item and Description No. Name Function 1 Name Enter the holiday name. 2 Date Display chosen date. Select the holiday types. 3 Type 4 Calendar e.g.,) Selecting Relative and 1, first, and Sun, which designates annual January of the 1st Sunday as a holiday. Select the holiday to add.
PAGE 42
4.2.3 Account > User Set the user’s account of the system. Figure 4-8 SYSTEM > Account > User Table 4-9 SYSTEM > Account > User Item and Description No. Name 1 Add Group 2 Add User Add users. 3 Group List Display a total group list. 4 User List 5 Live view restricted access 6 ADUP(Archive Dual User Permission) 7 Auto Login 8 Auto Logout 9 Function Add users’ group. Display user lists across groups. Do not display live video if log it out.
PAGE 43
Press Add Group button, then Add Group screen displays. Figure 4-9 SYSTEM > Account > User > Add Group Table 4-10 SYSTEM > Account > User > Add Group Item and Description No. Name Function 1 Name 2 PERMISSION Enter the group name. 3 Select items to permit access. Select channels to permit access. Press Add User button, then Add User screen displays. Figure 4-10 SYSTEM > Account > User > Add User Table 4-11 SYSTEM > Account > User > Add User Item and Description No.
PAGE 44
4) It contains at least one digit. Its length must be at least 10 if it satisfies only two of the above criteria. Its length must be at least 8 if it satisfies three or more of the above criteria. 4.2.4 Config (Configuration) Set Export/Import and Factory Default of the system. Config > Export/Import Through a save medium, users may apply information set to other devices identically. Figure 4-11 SYSTEM > Config > Export/Import Table 4-12 SYSTEM > Config > Export/Import Item and Description No.
PAGE 45
Config > Factory Default Default the setting value of the device. Figure 4-12 SYSTEM > Config > Factory Default Table 4-13 SYSTEM > Config > Factory Default Item and Description No. Name Function 1 Select All /Unselect All Select/deselect all items to be defaulted. 2 Default Item Select/deselect related items to be defaulted. 3 Default button Default the system to the basics.
PAGE 46
4.3 CAMERA In CAMERA section, set the camera to be connected with the device. 4.3.1 Basic Set the fundamental functions of camera and audio. Basic > Basic Set the basic items of camera by channels. Figure 4-13 CAMERA > Basic > Basic Table 4-14 CAMERA > Basic > Basic Item and Description No. Name 1 CH 2 Title 3 Covert 4 Copy Covert Setup Function Display the channel name. Enter the camera name of relevant channels.
PAGE 47
Press Copy Covert Setup button, then Copy Covert Setup screen displays. Figure 4-14 CAMERA > Basic > Basic > Copy Covert Setup Table 4-15 CAMERA > Basic > Basic > Copy Covert Setup Item and Description No. Name 1 From 2 To 3 Select All /Unselect All Function Select a channel converted setting. Select a channel to be copied. Select/deselect all channels.
PAGE 48
Basic > Audio In/Out How to set audio of camera across channels Figure 4-15 CAMERA >Basic > Audio In/Out Table 4-16 CAMERA > Basic > Audio In/Out Item and Description No. Name Function 1 No Display channels of audio 2 Use Select/deselect whether to use audio. 3 Assign Select channels to be assigned audio. 4 Record Select/deselect whether to save audio. 5 Line in Assign recorder line in to camera channel. IP camera audio will be disabled.
PAGE 49
4.3.2 Advanced As advanced function of camera, users can set privacy. Figure 4-16 CAMERA > Advanced Table 4-17 CAMERA > Advanced Item and Description No. Name Function 1 CH 2 Video Setup camera image such as Color, White Balance, WDR, AE and etc. 3 Stream Setup camera stream such as Resolution, Framerate, Bitrate and etc. 4 Video Analytics 5 Privacy Mask 6 Hi-Stream Display channels. Setup Video Analytics function if camera support this function.
PAGE 50
Video Setup Figure 4-17 CAMERA > Advanced: Video Table 4-18 CAMERA > Advanced: Video Item and Description No. Name Function 1 CH Display channel. 2 Init. Initionalize setting value. 3 Brightness, Saturation, Contrast, Sharpness, White Balance 4 Backlight Compensation Enable or disable BLC function. 5 Wide Dynamic Range Enable or disable WDR function. 6 IR Cut Filter Select Day&night control type. The setting value may differ depending on the connected camera.
PAGE 51
Stream Setup Figure 4-18 CAMERA > Advanced: Stream Table 4-19 CAMERA > Advanced: Stream Item and Description No. Name Function 1 CH 2 Main Stream Sets Codec type, Profile, Resolution, Framerate, Bitrate, GOP of Main stream. The values that can be set depend on the connected camera. For details, refer to the connected camera manual. 3 Sub Stream Sets Codec type, Profile, Resolution, Framerate, Bitrate, GOP of Sub stream. The values that can be set depend on the connected camera.
PAGE 52
Video Anlaytics Setup Figure 4-19 CAMERA > Advanced: Video Analytics Table 4-20 CAMERA > Advanced: Video Analytics Item and Description No. Name 1 CH 2 Mode 3 Function Display channel. Select whether to use this function in the NVR. Enable Video Select to activate the VCA menu on the camera. Contents Analysis  The Video Analytics (VA) menu is displayed only when a camera with VA Note function is connected.  The setting contents differ depending on the connected camera.
PAGE 53
Privacy Mask Setup Figure 4-20 CAMERA > Advanced: Privacy Mask Table 4-21 CAMERA > Advanced: Privacy Mask Item and Description No. Name 1 CH 2 Enable 3 New Mask Click to to create new mask on the screen. Drage the mouse to change the size and position of the mask. 4 ID, Name User can change the each mask name. 5 Delete Note Function Display channel. Select to activate Privacy Mask function. Delete the selected mask.
PAGE 54
Hi-Stream Setup The Hi-Stream function allows reduce bandwidth by using compression and frame rate control. Figure 4-21 CAMERA > Advanced: Hi-Stream Table 4-22 CAMERA > Advanced: Hi-Stream Item and Description No. Name Function 1 CH 2 Enable ROI 3 ROI Display channel. Select to activate Hi-Stream function. Video mode will be fixed to CVBR. Select Static ROI or Dynamic ROI. Static ROI is controlled based on the selected area. Dynamic ROI is controlled based on the entire area.
PAGE 55
4.3.3 Registration As registration function of camera, users can set IP camera registration. Figure 4-22 CAMERA > Registration Table 4-23 CAMERA > Registration Item and Description No. Name 1 Camera Registration 2 Registration list 3 Import Function Register IP Camera. See”3.3.2 Camera Registration” to display detailed information about the camera registration. Displays the status of the currently registered IP camera. Register IP camera using text file format.
PAGE 56
Click the Import button to open the Import window as shown blow. Figure 4-23 CAMERA > Registration > Import Table 4-24 CAMERA > Registration > Import Item and Description No. Name Function 1 Import USB 2 File Name 3 Import Import the camera list. 4 Connect Register the IP cameras based on the information from the list. Check the USB device is connected. If you connect a USB device with button to rescan.
PAGE 57
4.4 DEVICE In DEVICE, set the device to connect with the unit. 4.4.1 Display Set matters related to a display device and live screen. Display > Display Set the display device. Figure 4-24 DEVICE > Display > Display Table 4-25 DEVICE > Display > Display Item and Description No. Name 1 HDMI/VGA 2 Event Popup 3 Monitor Relay Switch Attention Function Select the resolution of the display device (1024x768, 1280x720, 1920x1080, and 3840x2160). Set duration of event popup screen.
PAGE 58
Display > OSD Set the OSD of the display device. Figure 4-25 DEVICE > Display > OSD Table 4-26 DEVICE > Display > OSD Item and Description No. Name 1 Camera Name 2 Live Bar 3 Display Icon Function Select the way to display camera in live screen (Off, CH+Title, CH, Title). Select the way to display the live bar (Always On, Auto Hide). Select/deselect icons to display in the live screen.
PAGE 59
Display > Sequence How to set the play sequence of live screen Figure 4-26 DEVICE > Display > Sequence Table 4-27 DEVICE > Display > Sequence Item and Description No. Name Function 1 Quad Sequence Set to convert automatically as 4-partition screen on the time basis(4ch model does not support this function). 2 Division Select screen partition mode to be marked in the below table (All, Full, and Quad). 3 Sequence List Display the sequence list based on division selected value.
PAGE 60
Clicking Add Sequence displays Add Sequence screen. Figure 4-27 DEVICE > Display > Sequence > Add Sequence Table 4-28 DEVICE > Display > Sequence > Add Sequence Item and Description No. Name 1 Dwell Time 2 Division 3 Function Select time to play (3 sec, 5 sec, 10 sec, 15 sec, and 30 sec). Select the partition screen to play (Full). Channel Selection Select channels to play.
PAGE 61
4.4.2 Disk > Setup Disk > Setup The way to set the disk Figure 4-28 DEVICE > Disk > Setup Table 4-29 DEVICE > Disk > Setup Item and Description No. Name Function Refresh disk information. 1 Display the basic disk information in disc list. 2 Disk Info     Model: disk model name Free: disk capacity to save Size (Capacity): total disk capacity Status: disk status Display saved disk information in disc list. 3 Rec.
PAGE 62
No. Name Function 8 Auto Delete Select/deselect to use the function to delete saved data automatically (1180 days) from desired channel. Disk > iSCSI The way to set the iSCSI Figure 4-29 DEVICE > Disk > iSCSI Table 4-30 DEVICE > Disk > iSCSI Item and Description No. Name 1 Select 2 Target Node Name 3 Status 4 Register Open iSCSI registration window. 5 Delete Delete registered iSCSI storage. 6 Detail Display selected iSCSI IP address and port number.
PAGE 63
Clicking Register displays iSCSI Register screen. Figure 4-30 DEVICE > Disk > iSCSI > Register Table 4-31 DEVICE > Disk > iSCSI > Register Item and Description No. Name Function Target Address 1 Target Port Input IP address and ports for iSCSI HTTP Port 2 Discover Click to search iSCSI storage. 3 Enable CHAP 4 User Name Enter user name of CHAP authentication. 5 Password Enter password of CHAP authentication. 6 Add Select Enable CHAP if iSCSI use CHAP authentication.
PAGE 64
4.4.3 PTZ > PTZ To use PTZ Function of the device, users need to match ID, protocol, and speed with each camera. Figure 4-31 DEVICE > PTZ > PTZ Table 4-32 DEVICE > PTZ > PTZ Item and Description No. Name 1 Copy PTZ Setup 2 CH Display channels. 3 ID Select camera ID connected to relevant channels (1-255). 4 Protocol Select protocol of camera connected to relevant channels. 5 Speed Note Function Apply setting history to all or selected channels in the same way.
PAGE 65
4.4.4 Serial Device > Serial Device Users need to set Serial Device to connect PTZ camera, USB device with the unit. Figure 4-32 DEVICE > Serial Device > Serial Device Table 4-33 DEVICE > Serial Device > Serial Device Item and Description No. Name 1 USB (to Serial) 2 RS-485 Function Set communication transmission value of USB device. Set communication transmission value of RS-485 connector.
PAGE 66
4.4.5 TEXT > TEXT Set the input device such as ATM or POS, etc. Figure 4-33 DEVICE > TEXT > TEXT Table 4-34 DEVICE > TEXT > TEXT Item and Description No. Name Function 1 Use Select/deselect whether to use text function. 2 CH Select camera channels to connect with the text input device. 3 Protocol Select protocol to correspond with the text input device. 4 ID. Port Select ID and port no. to correspond with the text input device. 5 Input Char.
PAGE 67
Press Copy to TEXT Setup button, then Copy to TEXT Setup screen displays. Figure 4-34 DEVICE > TEXT > TEXT > Copy to TEXT Setup Table 4-35 DEVICE > TEXT > TEXT > Copy to TEXT Setup Item and Description No. Name 1 From 2 To 3 Select All /Unselect All 4 Copy Item Function Select channels set. Select the device to be copied. Select/deselect all channels. Select/deselect items to be copied.
PAGE 68
4.5 RECORD In RECORD, users may set matters related to recording. 4.5.1 Schedule > Schedule Recording types can be set across channels and time. Figure 4-35 RECORD > Schedule > Schedule Table 4-36 RECORD > Schedule > Schedule Item and Description No. Name 1 CH 2 Schedule Type Selection Select the types of schedules. 3 Schedule Table Display the schedule users set. 4 Drag Field 5 Function Select channels to set schedules. Display the area dragged with a mouse.
PAGE 69
The function of each scheduling type involves: Table 4-32 Function of each scheduling type Color Scheduling type None Continuous Function Do not record. Record on consecutive mode when time set. Motion Record on event recording mode when motion sensitive event occurs. Alarm Record on event recording mode when alarm occurs. C+M Record on event recording mode when motion sensitive event occurs during consecutive mode recording.
PAGE 70
7 Copy Schedule Setup screen displays. 8 Select channels to be copied. 9 Select channels to apply copied content. 10 Copy the schedule by pressing Apply. 11 Press Save to save the schedule.
PAGE 71
4.5.2 Stream To set the image resolution when event occurs across channels or general recording is in process. Stream > Main Stream To set the image quality and resolution of Main Stream Figure 4-36 RECORD > Stream > Main Stream Table 4-37 RECORD > Stream > Main Stream Item and Description No. Name 1 CH Function Display channels. Resolution 2 Framerate Show camera main stream setup status.
PAGE 72
Clicking Copy Stream Setup opens Copy Stream Setup. Figure 4-37 RECORD > Stream > Main Stream > Copy Stream Setup Table 4-38 RECORD > Stream > Main Stream > Copy Stream Setup Item and Description No. Name 1 From 2 To 3 Select All /Unselect All 4 Copy Item Function Select the channel set. Select the device to be copied. Select/deselect all channels. Select/deselect items to be copied.
PAGE 73
Stream > Sub Stream To set the image quality and resolution of Sub Stream Figure 4-38 RECORD > Stream > Sub Stream Table 4-39 RECORD > Stream > Sub Stream Item and Description No. Name 1 CH Function Display channels. Resolution 2 Framerate Show camera second stream setup status. Bitrate 3 Pre-Alarm Start recording before set time, if event occurs. 4 Post-Alarm Recording after set time until event ends.
PAGE 74
Stream > Panic How to set immediate recording Figure 4-39 RECORD > Stream > Panic Table 4-40 RECORD > Stream > Panic Item and Description No. Name 1 Panic Record 2 CH Function Select/deselect to use immediate recording function. Display channels. Resolution 3 Frame rate Panic recording stream follows the Event stream. Quality 4 Dwell Time Select recording duration (Unlimited, 10 sec, 30 sec, 1 min, 5 min, 10 min, and 30 min).
PAGE 75
4.6 EVENT In EVENT, users may set each event of the device. 4.6.1 System/Disk To set the system and disk event System/Disk > System To set the system event of the device Figure 4-40 Event > System/Disk > System Table 4-41 Event > System/Disk > System Item and Description No. Name 1 System Restart 2 Notification Select/deselect whether to use mailing or mobile push in case of event. 3 User Login Select/deselect whether to use user-login event.
PAGE 76
System/Disk > Disk To set disk event Figure 4-41 Event > System/Disk > Disk Table 4-42 Event > System/Disk > Disk Item and Description No. Name Function 1 Disk Unplugged 2 Beep 3 Alarm out Select to end alarm time (Keep, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour). 4 Notification Select/deselect whether to use mailing or mobile push in case of event. 5 Disk Full 6 S.M.A.R.T.
PAGE 77
4.6.2 Alarm In To set sensor alarms and schedule Alarm In > Setup To set sensor alarms Figure 4-42 Event > Alarm In > Setup Table 4-43 Event > Alarm In > Setup Item and Description No. Name 1 Sensor 2 Use Function Display sensor numbers. Select/deselect whether to use alarm in the sensor. Select sensor types (N.O, N.C, NET).  N.O: Normally Open  N.C: Normally Close  NET: Select when using the camera’s alarm input function.
PAGE 78
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing Icon( displays Event : Alarm screen. ) in right corner Figure 4-43 Event > Alarm In > Setup > Event : Alarm Table 4-44 Event > Alarm In > Setup > Event : Alarm Item and Description No. Name Function Set the alarm. 1 Alarm-out  Relay: Select/clear the Relay output checkbox.
PAGE 79
Alarm In > Schedule To schedule recording time when alarm occurs across device sensors Figure 4-44 Event > Alarm In > Schedule Table 4-45 Event > Alarm In > Schedule Item and Description No. Name 1 Sensor 2 Schedule Type Selection Select the types of schedules. 3 Schedule Table Display the schedule users set. 4 Drag Field 5 Copy to Alarm Schedule Note Function Select the sensor to set the schedule. Display the area dragged with a mouse. Copy the schedule on alarm set to other sensors.
PAGE 80
4.6.3 Motion To set and schedule motions across channels Motion > Setup To set motions across channels Figure 4-45 Event > Motion > Setup Table 4-46 Event > Motion > Setup Item and Description No. Name Function 1 CH Display channels. 2 Use  Off: Do not use Motion events.  Motion: set motion in NVR.  VCA: use the VCA event input from the camera. 3 Area 4 Sens. It displays the sensitivity set in the Motion Area(Level 1~10).
PAGE 81
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing icon( ) in right corner displays Event : Alarm screen. For more information about Event : Motion screen, see section “4.6.2 Alarm In > Setup in Alarm In.
PAGE 82
4.6.4 Video Loss > Setup To set Video Loss across channels Figure 4-47 Event > Video Loss > Setup Table 4-48 Event > Video Loss > Setup Item and Description No. Name 1 CH Display channels. 2 Use Select/deselect whether to use Video Loss in the channel. 3 Beep Select use time of buzzer sound (None, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour). 4 Alarm Set alarm output. 5 Group Rec. 6 Noti.
PAGE 83
4.6.5 Notification To set and schedule periodical alarms Notification > Periodic To set periodical alarms Figure 4-48 EVENT > Notification > Periodic Table 4-49 EVENT > Notification > Periodic Item and Description No. Name 1 Periodic Notification Function Select/deselect whether to use periodical alarms Send the save or event information.  Record: sending the save information  Event: sending the event information 2 Summary 3 Interval 4 Select CH Select channels users want.
PAGE 84
Notification > Schedule To schedule periodical alarms Figure 4-49 EVENT > Notification > Schedule Table 4-50 EVENT > Notification > Schedule Item and Description No. Name 1 Notification Type Selection 2 Schedule Table 3 Drag Field Display the area dragged with a mouse. 4 Dwell Time Set Notification dwell time(1Min~1Hour). Note Function Select the types of notification. (None, E-mail, Push(Mobile), E-mail+Push, FTP, FTP+E-mail, FTP+Push, FTP+E-mail+Push) Display the schedule users set.
PAGE 85
4.7 NETWORK In NETWORK, users may set the network environment. 4.7.1 Basic Basic > WAN Port To set the network WAN port Figure 4-50 NETWORK > Basic > WAN Port Table 4-51 NETWORK > Basic > WAN Port Item and Description No. Name 1 Static IP 2 MAC Address 4 DNS 5 Port (TCP/RTSP) 7 8 Check if you use static IP. For using static IP, enter IP address, Subnet Mask, and Gateway. DHCP (Dynamic) Select whether to use DHCP (Dynamic). 3 6 Function Encryption Display the MAC Address.
PAGE 86
No. Name Function 11 Bandwidth Limit 12 Ping Test Select bandwidth to limit (Unlimited, 50Mbps, 10Mbps, 5Mbps, 2Mbps, 1Mbps, 500Kbps, 400Kbps, 300Kbps, 200Kbps, and 100Kbps). Enter IP in Ping test and implement the text. Basic > PoE Ports To set the network PoE Port Figure 4-51 NETWORK > Basic > PoE Ports Table 4-52 NETWORK > Basic > PoE Ports Item and Description No. Name 1 DHCP Server Function Select whether to enable DHCP server.
PAGE 87
Basic > IP Filter To set the network IP Filter Figure 4-52 NETWORK > Basic > IP Filter Table 4-53 NETWORK > Basic > IP Filter Item and Description No. Name Function 1 Mode 2 Range Start Enter the Start IP address to Access or to Deny. 3 Range End Enter the End IP address to Access or to Deny. Select None to disable. Select Access to access IP address range. Select Deny to restrict IP address range.
PAGE 88
4.7.2 DVRNS/DDNS To set DVRNS/DDNS DVRNS/DDNS > DVRNS/Dashboard To register DVRNS/Dashboard account Figure 4-53 NETWORK > DVRNS/DDNS > DVRNS/Dashboard Table 4-54 NETWORK > DVRNS/DDNS > DVRNS/Dashboard Item and Description No.
PAGE 89
DVRNS/DDNS > DDNS To set DDNS site for remote users to access in networking Figure 4-54 NETWORK > DVRNS/DDNS > DDNS Table 4-55 NETWORK > DVRNS/DDNS > DDNS Item and Description No. Name Function 1 DDNS Site Select DDNS site 2 Host Name Enter the host name. 3 User Name Enter the user name. 4 User Password Enter the user password.
PAGE 90
4.7.3 E-Mail To set email server to send email on the occasion of event Figure 4-55 NETWORK > E-Mail > E-Mail Table 4-56 NETWORK > E-Mail > E-Mail Item and Description No. Name Function Select SMTP server. 1 Server Type      gmail.com hotmail.com aol.com naver.com daum.net 2 Address/Port Enter server address and port number. 3 Image Attach Select/deselect whether to attach JPG image. 4 Authentication Select/deselect using authentication and password.
PAGE 91
4.7.4 FTP Set up FTP server to send video to FTP server. The file format is AVI file. Figure 4-56 NETWORK > FTP > FTP Table 4-57 NETWORK > FTP > FTP No. Name 1 FTP Server 2 Function Select whether to use FTP. Address(URL)/Port Enter server address and port. 3 ID, Password Enter ID & Password of server. 4 Upload Path Enter upload directory. 5 Create Folder Enter desired folder name. 6 Base File Name 7 FTP Transfer Settings 8 Test Enter desired file name.
PAGE 92
4.7.5 Warp Register the recorder to monitor and control remotely. Figure 4-57 NETWORK > Warp > Registration Table 4-58 NETWORK > Warp > Registration No. Name 1 Use Warp 2 Warp device list 3 4 Function Select whether to use Warp. Registered devices can be selected in the Warp of a Quick menu. Shows registered devices. Delete the selected device. Add Recorder Register the recorder to monitor and control.
PAGE 93
Clicking Add Recorder opens Add Recorder. Figure 4-58 NETWORK > Warp > Registration > Add Recorder Table 4-59 NETWORK > Warp > Registration > Add Recorder No. Name Function 1 Device Type Search all Warp-enabled devices in Auto Detect mode. 2 Device List Show Warp-enabled device list. Click device. 3 Name 4 Address Enter the device address. It is entered automatically when selected in the device list. 5 Port Enter the TCP port. It is entered automatically when selected in the device list.
PAGE 94
4.7.6 P2P User can connect recorder from mobile app using QR code scan. Figure 4-59 NETWORK > P2P > P2P Table 4-60 NETWORK > P2P > P2P No. Name 1 P2P Registration 2 P2P QR Code 3 P2P Connection Function Click button to check up registration status. Scan QR code using mobile app to connect recorder. Display connection stauts.
PAGE 95
4.7.7 Notification Server Notification Server > Notification Server Figure 4-60 NETWORK > Notification Server > Notification Server Table 4-61 NETWORK > Notification Server > Notification Server No. Name 1 Notification Server 2 Type 3 IP 4 Port 5 Test Function Select/deselect to use Notification server. Select TCP or UDP Protocol. Enter the server IP address or host name. Enter the server port. Send a test message to the server to check the connection status.
PAGE 96
Notification Server > Notification Message Set up the message to be sent to the notification server when event occurs. Figure 4-61 NETWORK > Notification Server > Notification Message Table 4-62 NETWORK > Notification Server > Notification Message No. Name 1 Add 2 Function Notification message edit window pop-up. Deleted registered notification message. 3 CH 4 Event 5 Message Camera channel. Display event type as Motion, Alarm, Video Loss. Display notification message.
PAGE 97
Clicking Add opens Add Message Figure 4-62 NETWORK > Notification Server > Notification Message > Add Message Table 4-63 NETWORK > Notification Server > Notification Message > Add Message No. Name 1 CH 2 Event 3 Message Function Select the channel to add a message. Select the event type (Motion, Alarm In, Video Loss). Create a message to send.
PAGE 98
5. Search/Playback This chapter describes Live Launcher search and play menu in the below screen bar. Figure 5-1 Live Launcher Search, Play menu Table 5-1 Item and Description of Live Launcher Search, Play menu No. 5.1 Item Description 1 Search recording data (time, event, thumbnail, smart search, text and VCA). 2 Playback recorded data Search This function searches recorded data as Time, Event, Thumbnail, Smart Search, Text and VCA. Search > Time Recording data is searched by date and time.
PAGE 99
No. Item 6 Play Description Playing video clips. For more information about Live bar, see section “5.2 Playback.” 7 Cancel Ending search screen Search > Event Recording data is searched by event type. Figure 5-3 Search: Event Table 5-3 Search: Event Item and Description No.
PAGE 100
Table 5-4 Search: Thumbnail Item and Description No. Item 1 Calendar 2 CH 3 Time 4 Interval 5 Time Overlap 6 Time Lapse/Pause 7 Cancel Description Selecting dates to search Selecting channels to search Selecting time to search Setting time interval for searching images Selecting the overlapping section to play if there is a duplicate of the same time by changing the time.
PAGE 101
Search > TEXT Recording data is searched by keyword. Figure 5-6 Search: TEXT Table 5-6 Search: TEXT Item and Description No. Item Description 1 Select CH 2 Select All /Unselect All 3 Start Setting starting time to search 4 End Setting ending time to search 5 Keyword 6 Case Sensitive 7 Whole Word 8 Search 9 Event List 10 Thumbnail Field 11 Play 12 Cancel Select channels to search Select/deselect all channels.
PAGE 102
PAGE 103
Search > VCA Recording data is searched by VCA event type. Figure 5-7 Search: VCA Table 5-7 Search: VCA Item and Description No. Item Description 1 Select CH Selecting channels to search 2 Start, End Set start time and end time. 3 Event Type Selecting VCA event type. 4 Search 5 Event List 6 Thumbnail Field 7 Play 8 Cancel Search VCA event. Displaying event list searched Displaying thumbnail images of selected event Playback selected event.
PAGE 104
5.2 Playback To play recorded data Figure 5-8 Playback Launcher Table 5-8 Playback Launcher Item and Description No. Item 1 2 Description Display present play status. Date and Time Display date and time of playing videos. 3 Go to first section of the video. 4 Play fast backward(2~64x). 5 Decrease speed under playback mode (1/2~1/8x), Backward step under pause mode 6 Play backward, forward and pause the videos. 7 Play forward step. 8 Play fast forward(2~64x).
PAGE 105
Clicking opens Record Time-Line. Figure 5-9 Playback Launcher > Record Time-Line Table 5-9 Playback Launcher > Record Time-Line Item and Description No. Name Function 1 Time lines Shows the time recording status. Select the desired time with the mouse. 2 Add bookmarks at the selected time in the timeline. 3 Run a manual backup. For more information about manual backup, see section “3.2.1 Backup”. 4 Open the calendar pop-up window and select a date from the calendar.
PAGE 106
6. Webviewer This chapter describes webviewer for monitoring videos through a PC in remote mode. Table 6-1 System Requirement for Webviewer Item Recommended OS MicrosoftⓇ WindowsⓇ 10 x86(64bit) (Home Premium, Professional, Ultimate) Minimum MicrosoftⓇ WindowsⓇ XP Home SP3 MicrosoftⓇ WindowsⓇ 8(pro, Enterprise) CPU Intel CoreTM i5-2550 3.
PAGE 107
For using Viewer, users need to download Java. The way to download is shown as follows: In case of selecting Viewer(Internet Explorer) 1 Click Viewer. 2 When Java download screen opens, download and install JAVA. 3 Live images may be monitored.
PAGE 108
In case of selecting Viewer(Chrome) 1 After click Viewer, .jnlp file can be downloaded. Click Keep button. 2 Click webviewer_chrome.jnlp. 3 When Java download screen opens, download and install JAVA. 4 Live images may be monitored.
PAGE 109
In case of selecting Setup Users can set the menu in similar ways with NVR connected monitor.
PAGE 110
7. Appendix 7.1 Installing System Keyboard To setup the keyboard controllers, the user needs to setup the network, passwords and perform special tasks such as Uploading and Downloading programmed data from the dome cameras. To enter the Keyboard menu, press and hold CTRL and press MENU expressed as CTRL + MENU in the manual. You will see the following menu.
PAGE 111
Set USB On in the keyboard menu. Menu Status Configuration ON Client Keyboard : Only USB Port(The other ports and slave keyboards are not supported) OFF General Keyboard : Dome1/Dome2/RS232(The USB port is not supported) USB Note If Keyboard Controller power is disconnected and reconnected, you must also disconnect and reconnect the USB either from the Keyboard Controller or DVR/NVR side Keyboard Setup- for RS485 SET USB Off and Dome1: DVR5 in keyboard menu.
PAGE 112
Recorder Setup Set serial port of recorder. Device > Serial Device In case of USB Connection Name Baudrate Parity Data Stop bit Type USB 9600 None 8 1 Keyboard In case of RS-485 Connection Name Baudrate Parity Data Stop bit Type RS-485 9600 None 8 1 Keyboard KBD Controller Keys in Live mode Function Key Label Descriptions Enter the DVR/NVR MENU screen. Pressing the button also closes the MENU screen.
PAGE 113
Press again to exit zoom mode. Digital Zoom Control Digital zoom in/out control. From Live Display, click the FRE button to activate the Freeze Mode. Freeze When in the Live Mode, press the SEQ button will display another full live channel sequentially. Auto Sequence Mode Alarm Will turn off the alarm and beep. Record Toggle will start and stop the panic recording operation. Open search menu. Press again, menu move to Time -> Event -> Thumbnail -> Smart Search -> Text -> VCA.
PAGE 114
joystick operates as if in the normal control mode. While pressing and holding down the CTRL key, all movements of the joystick will start recording when in the pattern programming menu Cancel Cancels current inputs. Exits from currently running functions or menu, error status, etc. Enter Completes entering data for the password or title PTZ Enter or exit PTZ mode. Menu Open PTZ quick menu. Enter Enter button under quick menu or pop-up menu. Channel Change No. + Joystick Channel change.
PAGE 115
7.2 Product Specification 4ch(2HDDs) 8ch(2HDDs) 16ch(2HDDs) 4 IP 8 IP 16 IP Up to 8MP Up to 8MP Up to 8MP H.264, H.265 H.264, H.265 H.264, H.
PAGE 116
NETWORK WAN 1 RJ45 10/100/1000 Base-T 1 RJ45 10/100/1000 Base-T 1 RJ45 10/100/1000 Base-T PoE 4 RJ45 10/100 Base-T 8 RJ45 10/100 Base-T 16 RJ45 10/100 Base-T 38W(IEEE802.3at compliance) 73W(IEEE802.3at compliance) 130W(IEEE802.
PAGE 117
Channel 16ch(4HDDs) 32ch(4HDDs) 16 IP 32 IP Up to 8MP Up to 8MP H.264, H.265 H.264, H.
PAGE 118
Unlimited Unlimited (Guarantee 576Mbps, Support (Guarantee 576Mbps, Support Bandwidth Control) Bandwidth Control) CMS, Mobile, Web, Dashboard CMS, Mobile, Web, Dashboard 1 RCA, 16 IP Camera 1 RCA, 16 IP Camera 1 RCA, 1 HDMI 1 RCA, 1 HDMI Alarm In 16 Input(Terminal block) 16 Input(Terminal block) Alarm Out 1 Output(Terminal block) 1 Output(Terminal block) Serial Port 1 RS485(Terminal block) 1 RS485(Terminal block) 2 USB2.0, 1 USB3.0 2 USB2.0, 1 USB3.