User Manual

2.1 Installing HDD
How to install HDD in the device:
Attention

Withdraw the main plug before installing HDD to reduce the risk of injury or
electrical shock, or device malfunction.

Make sure to check the compatibility of HDD with the device.
Always switch off and unplug the unit. 1
Unscrew with a screw driver (+) and open the unit cover. 2
Unscrew HDD set screws of the bracket to disassemble. 3
Install HDD in the bottom case.
4
Fix the HDD-installed bracket with the unit. 5
Connect a data cable and power cable with HDD. 6
Close the cover and tighten screws. 7
2.2 Connecting with Exterior Device
How to connect each port to rear section of the unit:
Place the unit in a stable flat surface. 1
Make a room between front/rear sides of the device not to break connectors. 2
Warning
Do NOT install the device too close to the wall. Protrusive connects rear the unit
may be forcedly curved or pressed, which cause fires, electric shocks, or injury.
Check to switch off and unplug the unit. 3
Warning
Make sure to withdraw the mains plug before installing the device.
Connect input ports of IP camera .
4
Note
Connecting a camera port with the unit automatically detects the camera.
Connect audio input and output port with a mic and speaker. 5
Note
Assure regulations in the area whether recording to be legal or not.