User Manual

2.4.2 System
How to set the system of Easy Installation:
Set each item in System setting screen. 1
 Language: Select system language.
 Device Name: Enter the device name.
 Keyboard ID: To identify device usages in controlling NVR with RS485 through a keyboard
 Selecting the device ID. In case of simultaneous use of equipment, set ID with difference.
Note

As for using many NVRs, set ID with difference.
 HDMI/VGA: Set resolution of a monitor connected to the device.
Note

Video is not displayed through VGA port if set 3840x2160 resolution.

If resolution is set to 3840x2160 and a monitor that does not support this
resolution is connected to the HDMI port, it will automatically change to
1024x768 resolution.
Press Save button to save set value. 2
Press Next to end System setting and move the next setting phase. 3