User Manual

4.5.2 Stream
To set the image resolution when event occurs across channels or general recording is in process.
Stream > Main Stream
To set the image quality and resolution of Main Stream
Figure 4-36 RECORD > Stream > Main Stream
Table 4-37 RECORD > Stream > Main Stream Item and Description
No.
Name
Function
1
CH
Display channels.
2
Resolution
Framerate
Bitrate
Show camera main stream setup status.
3
Continuous
Select recording stream in case of Continuous mode.
4
Event
Select recording stream in case of Event mode.
5
Pre-Alarm
Start recording before set time, if event occurs.
(none, 1 sec, 2 sec, 3 sec, 4 sec, and 5 sec)
6
Post-Alarm
Recording after set time until event ends.
(5 sec, 10 sec, 30 sec, 1 min, 5 min, 10 min, 30 min, and 1hour)
7
Copy Stream
Setup
Copy main recording image set value to other channels.