User Manual

4.6.2 Alarm In
To set sensor alarms and schedule
Alarm In > Setup
To set sensor alarms
Figure 4-42 Event > Alarm In > Setup
Table 4-43 Event > Alarm In > Setup Item and Description
No.
Name
Function
1
Sensor
Display sensor numbers.
2
Use
Select/deselect whether to use alarm in the sensor.
3
Type
Select sensor types (N.O, N.C, NET).

N.O: Normally Open

N.C: Normally Close

NET: Select when using the camera’s alarm input function.
4
Beep
Select use time of buzzer sound (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min,
10 min, 30 min, and 1 hour).
5
Alarm
Set alarm output.
6
Group Rec.
Select the camera to record simultaneously.
7
Noti.
Set email notices.
8
Preset
Set preset of PTZ camera.
9
Copy to Alarm
Setup
Copy alarm set value to other channels. For more information about set
value copy, see section “4.5.2 Stream > Main Stream in Stream.”