User Manual

4.6.3 Motion
To set and schedule motions across channels
Motion > Setup
To set motions across channels
Figure 4-45 Event > Motion > Setup
Table 4-46 Event > Motion > Setup Item and Description
No.
Name
Function
1
CH
Display channels.
2
Use

Off: Do not use Motion events.

Motion: set motion in NVR.

VCA: use the VCA event input from the camera.
3
Area
It is actived when ‘Motion’ is selected in ‘Use’ menu.
Sets the motion area and sensitivity.
4
Sens.
It displays the sensitivity set in the Motion Area(Level 1~10).
5
Beep
Select use time of buzzer (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10
min, 30 min, and 1 hour).
6
Alarm
Set alarm output.
7
Group Rec.
Select the camera to record simultaneously.
8
Noti.
Set email notices.
9
Preset
Set preset of PTZ camera.
10
Copy to Motion
Setup
Copy motion set value to other channels. For more information about set
value copy, see section “4.5.2 Stream > Main Stream in Stream.”