User Manual

Note
Placing your mouse on Alarm, Group Rec, Noti., Preset and clicking editing
icon( ) in right corner displays Event : Alarm screen. For more information about
Event : Motion screen, see section “4.6.2 Alarm In > Setup in Alarm In.”
Attention
If corridor mode are active at IP camera site you have to set resolution of 2
nd
Stream at 240x320 to trigger NVR Motion event
Motion > Schedule
To schedule record time when the motion sensor detects across channels
Figure 4-46 Event > Motion > Schedule
Table 4-47 Event > Motion > Schedule Item and Description
No.
Name
Function
1
CH
Select channels to set schedules.
2
Schedule Type
Selection
Select the types of schedules.
3
Schedule Table
Display the schedule users set.
4
Drag Field
Display the area dragged with a mouse.
5
Copy to Motion
Schedule
Copy the motion detection schedule to other channels. For more
information about set value copy, see section “4.5.2 Stream > Main
Stream in Stream.”
Note
For more information how to schedule record time when the motion sensor detects
across channels, see section “4.5.1 Schedule > Schedule.”