User Manual

4.7 NETWORK
In NETWORK, users may set the network environment.
4.7.1 Basic
Basic > WAN Port
To set the network WAN port
Figure 4-50 NETWORK > Basic > WAN Port
Table 4-51 NETWORK > Basic > WAN Port Item and Description
No.
Name
Function
1
Static IP
Check if you use static IP. For using static IP, enter IP address, Subnet
Mask, and Gateway.
2
DHCP (Dynamic)
Select whether to use DHCP (Dynamic).
3
MAC Address
Display the MAC Address.
4
DNS
Select manual and enter DNS; otherwise choose automatic function.
5
Port (TCP/RTSP)
Enter TCP and RTSP port. Default is 9350.
6
Encryption
Select the Encryption box for video data by using TCP port.
Select to encrypt for video data through TCP port.
7
Port(Http/Https)
Enter HTTP/HTTPS port. Default is 80.
8
Redirect to HTTPS
Redirection to HTTPS when connecting via HTTP.
9
Port(IPC)
User can access camera directly using IPC port. Default is 5000.
10
Edit NAT
Select the protocol to be used for IP camera remote connection, either http
or https, or block the connection.