User Manual

Clicking Add Recorder opens Add Recorder.
Figure 4-58 NETWORK > Warp > Registration > Add Recorder
Table 4-59 NETWORK > Warp > Registration > Add Recorder
No.
Name
Function
1
Device Type
Search all Warp-enabled devices in Auto Detect mode.
2
Device List
Show Warp-enabled device list. Click button to search for a new
device.
3
Name
Enter the device name. It is entered automatically when selected in the
device list.
4
Address
Enter the device address. It is entered automatically when selected in the
device list.
5
Port
Enter the TCP port. It is entered automatically when selected in the device
list.
6
ID
Enter the ID of the device to be registered.
7
Password
Enter the password of the device to be registered.
8
Check
Click the Check button to check if you can connect.