User Manual

4.7.7 Notification Server
Notification Server > Notification Server
Figure 4-60 NETWORK > Notification Server > Notification Server
Table 4-61 NETWORK > Notification Server > Notification Server
No.
Name
Function
1
Notification Server
Select/deselect to use Notification server.
2
Type
Select TCP or UDP Protocol.
3
IP
Enter the server IP address or host name.
4
Port
Enter the server port.
5
Test
Send a test message to the server to check the connection status.
Click Save button when the transmission is successful.
TCP can check the results in the recorder, but UDP should be checked
in the notification server.